741863
16
Zoom out
Zoom in
Previous page
1/56
Next page
16
EN
3.2 EXTERNAL CLEANING
Only use a damp cloth with warm water or prod-
ucts suitable for cleaning stainless steel. Do not
use acidic products or ammonia.
WARNING: the appliance should never be leaned
with high pressure water sprays.
3.3 GLASS INSIDE THE DOOR AND DOOR CLEANING
To clean the glass inside the door wait until the oven
is completely cool. Then just open the oven door
and un-screw the up and down screw to release the
glass. The entire door can be cleaned thoroughly at
this position, with the glass still hinged to the door.
3.3 REPLACING LIGHT LAMPS
WARNING: Strictly adhere to the following pro-
cedure in order to avoid electrocution or damage
to people:
Disconnect the electrical connection of the oven
and leave it to cool.
Take off the side grids that hold the baking trays.
Unscrew the glass cover “A” while observing “C”.
Replace the lamp “B” with one having the same
characteristics.
Screw back on glass cover “A” while observing
washer “C”.
Put the side grids back on ensuring they are well
fitted.
Should the glass lid be broken or damaged, do not
use the oven until the lid is replaced (Contact the
Assistance Centre).
4. EXTRAORDINARY MAINTENANCE
It is advisable to have the appliance subjected to
periodical checks (at least once per year) by a spe-
cialized authorized technician.
Any maintenance, installation or repair work must
be carried out by qualified authorized personnel by
contacting the Assistance Centre. Before carrying
out any operation the appliance must be plugged
out at the mains, turn off the water mains taps and
wait for it to cool down.
Before moving the appliance from position, check
that the electricity and water connections (elec-
tric cables water pipe and drainage) are correctly
plugged out.
If the appliance is on wheels check that electric ca-
bles, pipes or anything else are not damaged while
moving it. Ensure the break is on. Avoid placing the
device near heat (such as fryers etc.)
After carrying out the task and replacing the appli-
ance in its initial position, check that the electric
and water are connected correctly.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 223291 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 223291 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 2,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info