741854
17
Zoom out
Zoom in
Previous page
1/56
Next page
17
EN
5. MAINTENANCE IN CASE OF BREAKAGE
If the appliance breaks, disconnect it from the mains and turn off water.
Before ringing Customer Service, check the chart below.
FAILURE CAUSE SOLUTION
The oven doesn’t start The door is not closed but open Check that the door is closed
Micro switch doesn’t indicate closed
door
Contact specialised technician for
repair (Assistance Service)
The fan stops while the oven is on
Safety thermostat measure motor Turn off the oven and wait for the
motor’s thermal protection to reset
itself. If the problem persists call
a specialised repair technician
(Assistance Service)
Motor capacitor break Contact specialised technician for
repair (Assistance Service)
Internal light does not work Loose lamp Correctly fit the lamp into the lamp
holder
Replace the lamp (see ordinary
maintenance)
Blown lamp
There is no water inflow from
the humidifier pipes
Water inlet closed Open water inlet
Incorrect connection to the water
supply system
Check connection to the water
supply system
The water filters are blocked
by impurities at the top
Clean the filters
Non-uniform cooking The fans no long invert the
direction of rotation
Contact specialised technician for
repair (Assistance Service)
One of the fans not operating
Failure of one of the resistances
The oven is completely OFF Supply voltage failure Restore power supply voltage
Incorrect connection to the power
supply network
Check connection to the power
supply network
Safety thermostat measure Contact specialised technician for
repair (Assistance Service)
Water leaking from the gaskets
with the door open
Dirty lining Clean the lining with a damp cloth
Damaged gasket Contact specialised technician for
repair (Assistance Service)
Problem regarding the closure
of the door
Contact specialised technician for
repair (Assistance Service)
If the problem persists we advise you to consult
a retailer of manufacturer asking for Assistance
Service specifying the problem and supplying the
code (Art.) and appliance Ser N°. This information
is provided on the INFORMATION PLATE on the
side of the machine.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 223277 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 223277 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 2,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info