741870

Hendi 223260 Manual

11
Zoom out
Zoom in
Previous page
1/56
Next page
11
EN
6.2 WATER TREATMENT
In order to ensure trouble-free operation of the
de-
vice, the water should have a hardness of maximum
5°dH to prevent lime deposits. For higher values
a water softening station should be installed first.
DETERGENT CONNECTION
Insert the pick up pipe into the detergent tank.
1 = WASHING water inlet
2 = CLEANING detergent inlet
7. DRAINAGE CONNECTION
Water flowing out from the oven drainage system
may reach high temperatures (90°). The pipes used
for discharging the water must be capable of bear-
ing such temperatures.
The discharge water pipe is located in the lower
rear part of the back of the oven and it should be
connected using a rigid or flexible pipe and con-
veyed to an open or trapped drainage; its diameter
shall not be smaller than that of the drainage con-
nection of the oven It is advisable to insert a suita-
ble syphon between the oven and the drain, so as
to stop emission of unpleasant odours and fumes
from the oven and drains.
Avoid narrowing the flexible pipes and elbow joints
on rigid pipes along the entire drainage system
meter.
The oven must have its own drainage connection.
If there are other appliance or tools connected to
the one pipe, check that their size allows proper
drainage without blockage.
The local regulations and standards must be fol-
lowed.
7.1 FUMES DISCHARGE
Hot fumes and odours are emitted from the cook-
ing chamber during cooking. This is located at the
top part of the back of the oven. Do not place ob-
jects on the discharge so as not to hinder the out-
flow of the fumes and hence avoid causing damage
thereto. It is advisable to position the oven under
a suctioning or ensure adequate ventilation to out-
side for hot fumes and odours through a pipe no
smaller than the oven drainage. Avoid bends and
blockages.
8. STACKING OVENS
Stacking several ovens requires the use of the special kit which keeps the correct distance between the two
ovens.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 223260 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 223260 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 2,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info