741861
9
Zoom out
Zoom in
Previous page
1/56
Next page
9
EN
A1
A3
A2
A4
Erroneous connection could lead to overheating of the terminal board which could lead to blowout and elec-
tric shock.
Check that all the connections are tight before connecting the oven to the mains.
E = Yellow/Green: “EARTH” protection conductor.
N = Blue: neutral conductor.
L1, L2, L3 = Brown, Grey, Black: live conductors
Check there is no static discharge between live and earth. Check the limit switch continuity between the ex-
ternal casing and the earth wire of the mains. It is advised to use a multi tester to carry out these operations.
5.2 CABLE SUBSTITUTION
This must be carried out by a qualified authorized
technician. The earth wire must always be yellow
green.
WARNING: the yellow/green voltage wires in the
earth cable must be 3 cm longer than the others.
Proceed as follows to connect the power supply
wire to the terminal board:
(A1) Loosen the tops of the cable gland and open
the side part of the appliance by loosening the
screws.
(A3) Loosen the terminal screws and feed the cable
conductors through. Take out the old cable from
the cable gland.
(A2) Feed the new cable through the cable gland.
Connect the new cable’s conductors to the ter-
minal following the connection diagram on the
label at the lower part of the back of the appli-
ance. Only connect what is indicated inserting the
copper bridge and the electricity cable together
under the screws, in the tightening direction, so
the cable and the bridge are tightly fixed by tight-
ening the screw. The type of cable to be used is
indicated on the label for each connection and
the voltage sections in mm².
(A4) Close the side part of the appliance by tight-
ening the screws and fit the cable by tightening
the cable gland top.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 223246 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 223246 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 2,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info