741867

Hendi 223215 Manual

20
Zoom out
Zoom in
Previous page
1/56
Next page
20
EN
8. DIGITAL OVEN CONTROL PANEL
Only model HENDI: 223291, 223277, 223253, 223239, 223215
K5 Encoder for regulation “ + / -“
L1 Thermostat light
L2 Humidification Light
L4 Timer led
L6 Cooking cycle led
L7 Chimney exhaust led
L8 Core probe led
L9 DELTA T led
B1 Temperature selector
B2 Steam selector
B3 ON /OFF button
B4 Timer selection
B5 Cooking programs
B7 Chimney exhaust selector
B8 Core probe selector
B9 DELTA T selector
B10 START / STOP cooking
B11 Speed regulation
C1 Core probe inlet
ON/OFF
When power is supplied to the oven the control
panel lights up and the operating display indicates
off. Activating the control panel requires pressing
the on/off.
TEMPERATURE SELECTOR
Press Temperature button, set the temperature
value by acting on the encoder knob. It rotates
clockwise and anticlockwise, thus it increase or
reduces the temperature which appears on the
temperature display and press the knob for con-
firmation. The oven will show always the real tem-
perature inside the cooking chamber. To see what
temperature was confirmed press the temperature
button.
CORE PROBE
For cooking with core probe you need to fit the un-
der position, press the core probe button and set
the temperature value by acting on the encoder
knob + press for confirmation.
The oven turns off when the inserted core probe
registers the food temperature requested.
B9
L9
L2
L6
B2
B10
B8
L8
L7
B7
B11
B1
L1
L4
B4
B5
B3
K5
C1
DELTA T
For cooking with Delta T you need to press the Del-
ta T button and:
a) set the temperature value of core probe by acting
on the encoder knob + press for confirmation
b) set the temperature value of cooking chamber
(difference you want from core probe and cooking
chamber) by acting on the encoder knob + press
for confirmation
Remember that you need to fit the core probe at
the oven before starting this selection
CHIMNEY EXHAUST SELECTOR
Press the exhaust button and set the percentage of
open/close for the chimney acting on the encoder
knob + press for confirmation.
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 223215 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 223215 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 2,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info