741082
6
Zoom out
Zoom in
Previous page
1/160
Next page
6
EN
Preparations before installation
Carefully unbolt the machine from the skid using
wrench if necessary.
Remove all protective packaging and wrapping.
Check the machine for completeness and trans-
port damages. In case of incomplete delivery (e.g.
Whisk, flat beater and dough hook) or damage,
contact supplier immediately. DO NOT use the
machine. (See ==> Warranty).
Clean the machine and attachments before use
(See ==> Cleaning and Maintenance).
Make sure the appliance is completely dry.
Installation
Read this manual thoroughly and carefully before
installation and operation.
Ensure the machine is placed in a dry area that
have sufficient strength surface to support with
no any obstruction during operation nearby.
Ensure that the electrical power supply corre-
sponds with the rating label on the machine.
There should have adequate space around the
machine for the operator to operate. It should be
clean and free from obstructions, e.g. Nothing
placed on or around the machine, such as scrap-
ers, knives etc.
Do not wear loose fitting clothing such as scarf,
etc and long hair should be tied up and keep away
from the moving parts.
CAUTION! Never bypass any safety switch.
Transportation and handling
Do not move the machine while it is under op-
eration.
Unplug the machine, remove the bowl (2) and all
attachments (whisk, flat beater or dough hook)
when moving the machine.
Hold the base of the machine (1) when moving to
have better support.
With at least 2 people or using trolley for assis-
tance to move the machine due to heavy weight.
Special safety features
Attention: This machine has the following 3 safety switches. The machine only be started with all the safety
switches are at the proper positions.
Bowl position safety switch: The machine can be
started up once the bowl is positioned at the cor-
rect position.
Bowl guard (5) safety switch: The machine can
only be started up once the bowl guard (5) is in
the closed position.
Bowl lift up handle (9) safety switch: The machine
can only be started up once the bowl lift up han-
dle (9) is located in the upwards position.
Do not wear loose fitting clothing such as scarf, etc
and long hair should be tied up and keep away from
the moving parts
Operation
To avoid serious personal injury:
DO NOT operate the machine without reading the
instruction manual.
ALWAYS STOP the machine by pressing RED
“O” button (8) and unplug from electrical power
supply before cleaning, maintenance, repair or
changing any attachments.
ALWAYS keep hands, hair and loose clothing
away from the moving parts.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 222973 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 222973 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Norwegian as an attachment in your email.

The manual is 2,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info