741081
10
Zoom out
Zoom in
Previous page
1/160
Next page
10
EN
Troubleshooting
If the machine does not function properly, please check the below table for the solution. If you are still una-
ble to solve the problem, please contact the supplier/service provider. DO NOT repair yourself.
Problems Possible causes Possible solution
Machine do not start running
Bowl guard (5) is not in properly closed position. Rotate the bowl guard (5) to the right until ful
-
ly closed properly.
Bowl (2) is not raised to the proper location. Raise the bowl (2) to the correct position by
using the level (9).
The power plug is not connected properly. Check to make sure the power plug is con
-
nected properly.
Machine stops during operation
Internal overload activates to prevent overheat. Press RED, “O” button (8), unplug the ma
-
chine, leave for cook down completely, press
RESET button (10) at the back.
Damage or broken transmission belt Check with the supplier
Machine sound too noisy
Machine is not placed on a horizontal surface.
Adjust the surface or move to another hori
-
zontal surface.
Bowl (2) is not placed correctly.
Make sure the bowl (2) is placed into the bowl
cradle (12) correctly with the guided pins (3).
Attachments not fitted properly.
Remove and install the attachments into po
-
sition again.
Bowl is overloaded. Reduce ingredients capacity.
Damaged or worn transmission belt.
Check with the supplier.
Planetary gear needs lack of lubricant.
Attachments cannot install
onto the planetary shaft easily
Lack of lubricant and / or cleaning of the plane
-
tary shaft required.
Wipe planetary shaft with a clean damp cloth
and lubricate the shaft with mineral oil or
grease.
Bowl lift / lower handle (9) not
operation easily
Lack of lubricant on the bowl slides.
Lubricate bowl slides with mineral oil or
grease.
Technical specification
Item no. 222836 222966 222843 222973
Operating voltage and frequency 220 – 240 V~ 50/60Hz
Rated input power 600W 1100W
Net weight (approx.) 53kg 78kg
Protection class Class I
Waterproof protection class IP23
Rotation speed (r.p.m.)
Dough hook 148 197
Flat beater 244 317
Whisk 480 462
Maximum bowl capacity 10L 20L
Maximum amount flour mixing 2,5 kg 5,0 kg
Max noise level < 70 dB (A)
Outer dimension 480 x 400 x (H) 630mm 560 x 500 x (H) 880mm
Remark: Technical specification is subjected to change without prior notification
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 222966 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 222966 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Norwegian as an attachment in your email.

The manual is 2,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info