Manual Hendi 221808 (page 7 of 56) (English, German, Dutch, French, Italian, Polish)

742598

Zoom out

Zoom in

1/56

• Tighten the screws ﬁrmly but do not over tighten. Over tightening can damage the screws,

greatly reducing the holding power.

• During installation, keep away the pet and children.

• Do not insert any objects into the air intake or exhaust. (risk of electric shock).

• Do not cover the appliance. (risk of overheating).

• Do not block the exhaust. (risk of triggering the thermal fuse).

• Do not allow contact with liquids. (risk of short-circuiting).

Intended use

• The appliance is intended for professional use.

• The appliance is designed only for drying hands.

Any other use may lead to damage of the appli-

ance or personal injury.

• Operating the appliance for any other purpose

shall be deemed a misuse of the device. The user

shall be solely liable for improper use of the de-

vice.

Grounding installation

This appliance is classiﬁed as class I protection

appliance and must be connected to a protective

ground. Grounding reduces the risk of electric

shock by providing an escape wire for the electric

current. This appliance is equipped with a cord

hav¬ing a grounding wire with a grounding plug.

The plug must be plugged into an outlet that is

properly in¬stalled and grounded.

Preparations before installation

Before installation: Check the appliance and its

screw holes at the back for any damage.

Note: Installation kits (included) and consult a

qualiﬁed contractor or installer if you are not cer-

tain the structure of the structure of the wall and

ensure that the procedure is carried out properly

and safely.

• Important: make sure the appliance is mounted

within the reach of the electrical outlet.

• Important: do not mount the appliance on dry-

wall or panelling without ﬁrst anchoring to a wall

stud.

• Important: before start mounting, make sure you

have all the tools, such as screw driver, electric

drills, measuring tape, marking pencil (not in-

cluded).

• The appliance must be securely anchored on the

wall by attaching the screws

• Locating the wall studs: anchoring the assures

that the appliance will not loose during operation.

Be aware that items such as ducts, electrical

wires and water pipes may be behind the walls

in your work area.

• For attaching the appliance securely to other wall

surfaces such as concrete or brick, see your local

hardware store for recommendations on using

the appropriate concrete and masonry fasteners

and anchors for your particular structure.

Installation on the wall

Attention: Installation should be performed by a

professional installer or electrician.

1) Drill four holes (ø 8 mm) in the wall (for position

of the holes check Illustration 1 and 2). Put the

wall plugs into the holes

2) Remove the two screws that keep the cover in

place and remove the cover. (Illustration 3)

3) Pull the wires through the hole and ﬁx the appli-

ance to the wall with 4 screws, then connect the

power wire to a power source (the ground wire is

yellow and green). (Illustration 4)

4) Close the cover and secure it with the two screws

from step 2. (Illustration 5)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 221808 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 2,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hendi 221808 Manual

Product: