Manual Hendi 215029 (page 6 of 72) (English, German, Dutch, French, Italian, Polish)

741310

Zoom out

Zoom in

1/72

Switch ON

• Make sure the tap is closed and that the oil tank

has enough oil, level should be between MIN and

MAX marking.

• Connect the power plug to a suitable electrical

supply outlet.

• Next, press the power switch at the rear side of

the appliance to connect the power supply. Green

indicator on the power switch will light up.

• Now the appliance is connected to electrical sup-

ply.

Operation

• Press ON / OFF (1) to switch ON the appliance.

FILL OIL (5) indicator ﬂashes and buzzer sound

will be heard to alert the user to ﬁll up the oil

tank container.

• Then, please make sure again the oil level is be-

tween the MIN and MAX marking.

• If the oil tank contains enough oil, press FILL OIL

(5) to cancel the buzzer sound and the indicator

light. The display will show the default tempera-

ture of 140°C.

• After that, press UP (3) or DOWN (4) button to

increase or decrease the temperature. (Range:

60°C ~ 190°C, with 5°C interval).

• When the oil doesn’t reach the set temperature,

“HEATING Indicator” will light up and “KEEP

WARM Indicator” will go out.

• When the oil temperature reaches the set tem-

perature, “HEATING Indicator” will go out and the

“KEEP WARN Indicator” will light up.

Note: During operation, if no temperature is set,

the appliance will maintain to the default temper-

ature 140°C.

Setting Timer

• Timer can be set by pressing the TIMER (2) to

enter TIMER mode.

• Then, press UP (3) or DOWN (4) to increase or

decrease the time. (Range: 0 min ~ 15 mins, with

30 seconds interval). Default setting is 0 min.

• When the timer is set, it will be stored automati-

cally within 5 seconds. Then, timer will be started

to count down from the set time.

• Display (6) will alternate between Time remaining

/ Set temperature.

• When the set time has elapsed, a beeping sound

(long and short) will be heard and “End” will be

shown in the display (6). The appliance will keep

on heating if the set temperature isn’t reached.

• Press and hold the UP (3) or DOWN (4) for fast

adjustment of timer.

Note: 1. Press and hold the increase setting button

(3) or decrease setting button (4) for fast

adjustment.

2. Every time, you press any button on the

panel, a short beep sound will be heard to

alert the user.

3. After an extended period of operation, it is

normal for the cooling fan inside to con-

tinue running in OFF mode for some time.

Before unplug the appliance, wait until the

cooling fan stops running.

4. The appliance’s outer surface is still hot

even after switch to OFF mode. Please

wait the appliance completely cool down

before touching or cleaning.

5. If no any button on the control panel is

pressed during operation for 4 hours, the

appliance will then switch to OFF mode

automatically.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 215029 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 0,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hendi 215029 Manual

Product: