741307

Hendi 215012 Manual

8
Zoom out
Zoom in
Previous page
1/72
Next page
8
EN
Troubleshooting
If the appliance does not function properly, please
check the below table for the solution. If you are
still unable to solve the problem, please contact the
supplier/service provider.
• Error codes shown on the digital display (6). (See
--> Error codes display)
Problems Possible cause Possible solution
The appliance does not switch
ON.
- Power plug is not connected properly
with the electrical outlet.
- On/OFF (1) button is not pressed.
- Check the power plug to make sure
it is connected properly.
- Press the On/OFF (1) button to start
operation.
Cooling fan is operating even after
the appliance is switched to OFF
mode.
- This is normal. The cooling fan contin-
ues running in OFF mode for some time
to cool down all internal elements.
- Wait until the cooling fan stops ro-
tating.
Technical specification
Item no. 215012 (Single tank version) 215029 (Double tanks version)
Operating voltage and frequency 220- 240V~ 50-60Hz 220-240V~ 50-60Hz
Rated input power 3500W 2 x 3500W
Temperature setting 60°C ~ 190°C (with 5 °C interval) 60°C ~ 190°C (with 5°C interval)
Timer setting 0 min ~ 15 mins (with 30 seconds in-
terval)
0 min ~ 15 mins (with 30 seconds in-
terval)
Protection class Class I Class I
Waterproof protection class IPX4 IPX4
Oil tank 8L 2 x 8L
Dimension 290 x 485 x (H) 406 mm 580 x 485 x (H) 406 mm
Remark: Technical specification is subjected to change without prior notification
Warranty
Any defect affecting the functionality of the ap-
pliance which becomes apparent within one year
after purchase will be repaired by free repair or re-
placement provided the appliance has been used
and maintained in accordance with the instructions
and has not been abused or misused in any way.
Your statutory rights are not affected. If the appli-
ance is claimed under warranty, state where and
when it was purchased and include proof of pur-
chase (e.g. receipt).
In line with our policy of continuous product devel-
opment we reserve the right to change the product,
packaging and documentation specifications with-
out notice.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 215012 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 215012 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 0,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info