741741

Hendi 212127 Manual

6
Zoom out
Zoom in
Previous page
1/60
Next page
6
EN
Operation
• Clean the baking plate by a moist cloth before
first time of using.
• Connect the power plug with a suitable electrical
outlet.
• Switch on the appliance with the ON/OFF switch,
it will light up. Then turn the temperature con-
trol knob clockwise to select the required baking
temperature.
• When the baking plate is heating up, the Orange
heating indicator light up.
• Wait 5 to 10 minutes for preheating. Once the set
temperature is reached, the Orange heating indi-
cator will go off automatically.
• Now it is ready for baking. Lightly coat the lower
baking plate with butter, margarine or suitable
baking oil. Then, spread the waffle dough evenly
on the lower baking plates. Do not pour too much
tough.
• Close the lid by using the handle.
• Orange heating indicator lights up again for heat-
ing up. After about 2 ~ 4 minutes (time depends
on dough moisture, content, etc) Orange heat-
ing indicator will go off again. The waffle is now
ready.
• Remove the waffles using a waffle fork (supplied).
Never use abrasive utensils. This may damage
the non-stick coating of the baking plates. Nev-
er use bare hands to touch the food. Danger of
burns!
Note: When you pour the batter onto the hot bak-
ing plate, you might hear some slight cracking
noise caused by difference in temperature. This
is normal.
• Close the appliance if more waffles are to be
baked, in order to maintain the temperature.
• After use: set the Temperature control knob to
zero degree in upwards position until the Orange
heating indicator goes out.
Attention! Disconnect the power plug from the
electrical outlet and let it cool completely be-
fore cleaning and storing.
Note: Due to the manufacturing residues, the ap-
pliance may emit slight odor in the first few cycles.
This is normal and does not indicate any defect or
hazard. Make sure the appliance is well ventilated
during operation.
RESET the Hi-limiter (thermal cut-out)
Please note that a RESET button located at the bot-
tom of the appliance.
• Unplug the appliance electrical power outlet.
• Allow the appliance to completely cool down.
• Press the RESET button of the Hi-limiter (ther-
mal cut-out). You should hear a click sound.
• Plug into the socket and you can use it again.
Cleaning and maintenance
Attention: Always unplug from the electrical power supply outlet and let it cool down completely before clean-
ing and storage.
Cleaning
• Never immerse the appliance in water or other
liquids.
• Clean the cooled exterior surface with a slightly
damp cloth or sponge with some mild soap solu-
tion.
• Never use abrasive sponges or detergents, steel
wool or metallic utensils to clean the interior or
exterior parts of the appliance.
Storage
• Before storage, always make sure the appliance
has already been disconnected from the electri-
cal outlet and cooled down completely.
• Store the appliance in a cool, clean and dry place.
• Never put heavy objects on the appliance as it
may damage the appliance.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 212127 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 212127 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Norwegian as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info