Manual Hendi 212103 (page 7 of 60) (English, German, Dutch, Danish, French, Italian, Polish, Norwegian)

741734

Zoom out

Zoom in

1/60

Troubleshooting

If the appliance does not function properly, please check the below table for the solution. If you are still unable

to solve the problem, please contact the supplier/service provider.

Problems Possible causes Possible solutions

The appliance is con-

nected to the power sup-

ply but the heating indi-

cator does not light up.

Power plug is not connected properly

to the electrical power supply outlet.

Check again to make sure it is

connected properly.

Heating indicator defective. Contact the supplier.

Hi-limiter (thermal cut-out) acti-

vates.

RESET the Hi-limiter [See = = > RE-

SET the Hi-limiter (thermal cut-out)]

The appliance does not

heat up but the heating

indicator light up.

Temperature control knob defective Contact the supplier.

Heating element defective Contact the supplier.

Technical specification

Item no. 212103 212127 212134

Operating voltage and frequency 220-240V~ 50/60Hz

Rated input power 1500W 2200W 2200W

Temperature setting 0°C ~ 300°C (MAX)

Protection class Class I

Waterproof protection class IPX3

Net weight (approx.)

22kg 17kg 11kg

Dimension 320x437x(H)251mm 320x437x(H)277mm 320x437x(H)251mm

Remark: Technical specification is subjected to change without prior notification.

Warranty

Any defect affecting the functionality of the ap-

pliance which becomes apparent within one year

after purchase will be repaired by free repair or re-

placement provided the appliance has been used

and maintained in accordance with the instructions

and has not been abused or misused in any way.

Your statutory rights are not affected. If the appli-

ance is claimed under warranty, state where and

when it was purchased and include proof of pur-

chase (e.g. receipt).

In line with our policy of continuous product devel-

opment we reserve the right to change the product,

packaging and documentation speciﬁcations with-

out notice.

Discarding & Environment

When decommissioning the appliance, the prod-

uct must not be disposed of with other household

waste. Instead, it is your responsibility to dispose to

your waste equipment by handing it over to a des-

ignated collection point. Failure to follow this rule

may be penalized in accordance with applicable

regulations on waste disposal. The separate col-

lection and recycling of your waste equipment at

the time of disposal will help conserve natural re-

sources and ensure that it is recycled in a manner

that protects human health and the environment.

For more information about where you can drop off

your waste for recycling, please contact your local

waste collection company. The manufacturers and

importers do not take responsibility for recycling,

treatment and ecological disposal, either directly

or through a public system.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 212103 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Norwegian as an attachment in your email.

The manual is 0,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hendi 212103 Manual

Product: