741732
6
Zoom out
Zoom in
Previous page
1/60
Next page
6
EN
Operation
Clean the baking surface with a clean damp cloth
before each use & let dry afterwards.
Connect the power plug with a suitable electri-
cal outlet. Turn on the switch(2),it will light up in
green to show that it is connected to the electri-
cal power supply.
Start the appliance by turning the temperature
control (1) in a clockwise direction to select the
required baking temperature.
Wait for about 15 ~ 20 minutes to let the baking
plate heating up to about 250-300°C (Max).
Then, pour a small amount of crepe batter onto
the baking plate with a spoon. Use a wooden
spreader (4) to spread it in circular movements.
Note: Moisten the wood spreader before use. This
prevents the batter from sticking to the spreader
(4).
Allow the crepe to cook on one side until its
surface is no longer liquid visibly. Use a wood-
en spatula or heat-resistant plastic spatula (not
supplied) to lift one side of the crepe gently. The
crepe should be visibly cooked, may be some
in brown. In this case, the crepe is ready to be
flipped.
Note: When you pour the batter onto the hot bak-
ing plate, you might hear some slight cracking
noise caused by difference in temperature. This
is normal.
Note: Do not overcook the crepe, or the texture
will become rubbery. The crepe can be cooked
quickly under high temperature. So, it can be
flipped within about 2~3 minutes if you select a
suitable temperature.
Turn the crepe over to other side carefully. It only
needs to cook on the other side for about 30 ~ 40
seconds.
Carefully remove the crepe from the baking plate.
Continue making more crepes until you ran out
of batter. Do not use hand to touch the crepe as
it is still hot.
If necessary, adjust the temperature by rotating
the temperature control.
Switch OFF the appliance by rotating the temper-
ature control (1) anti-clockwise direction to 0°C
and turn the switch(2) off.
Attention! Disconnect the power plug when not in
use. Leave the appliance to cool down completely
before cleaning and storing.
RESET the Hi-limiter (thermal cut-out)
Please note that a RESET button is located at the
rear side of the appliance covered with a protective
cap. (See diagram)
Unplug the appliance from the electrical outlet
first.
Allow the appliance to completely cool down.
Unscrew the black protective cap of the RESET
button.
Press the RESET button of the Hi-limiter (ther-
mal cut-out). You should hear a click sound.
Screw back the protective cap on the RESET but-
ton.
R
E
S
E
T
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hendi 212028 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 212028 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Norwegian as an attachment in your email.

The manual is 0,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info