Manual Hendi 210864 (page 6 of 68) (English, German, Dutch, French, Italian, Polish)

741110

Zoom out

Zoom in

1/68

5. INSTRUCTION FOR USE

5.1. ASSEMBLING

• Due to unintended starting up of the KS100E

• Place grinder/feeder head tightly into attachment

opening (ﬁ g.1). Holding head with one hand, place

locking knob into the hole on the side of the mo-

tor housing and tighten knob by turning clockwise

(ﬁ g.2).

• Place the snake into the head, long end ﬁ rst, and

turn to feed the screw slightly until it is set into the

motor housing (ﬁ g.3).

• Place the cutting blade onto the snake shaft with

the blade facing the front as illustrated (ﬁ g.4). If

it is not ﬁ tted properly, meat will not be grinded.

• Place the desired cutting plate next to the cutting

blade, ﬁ tting protrusions in the slot (ﬁ g.5).

• Support or press the centre of the cutting plate

with one ﬁ nger then screw the ﬁ xing ring tight with

another hand (ﬁ g.6). Do not over tighten.

• Place the hopper plate on the head and ﬁ x it into

position.

• Locate the unit on a ﬁ rm place.

• The air passage at the bottom and the side of

the motor housing should be kept free and not

blocked.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 210864 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 0,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hendi 210864 Manual

Product: