Manual Hendi 210819 (page 6 of 60) (English, German, Dutch, French, Italian, Polish)

741107

Zoom out

Zoom in

1/60

• Before grinding, tighten the thumb screw clock-

wise until secure. Do not use a tool or over-tighten.

• Prepare meat for grinding by remove all skin and

bones. Then cut the meat into appropriately sized

pieces for grinding.

• Feed meat into the grinding chamber with special

meat pusher that was included with your machine.

Never use ﬁngers, hands, or any other objects.

• After use, disconnect unit from the power sup-

ply. Disassemble the head, wash and dry all parts

thoroughly.

• If the unit is overloaded, it will shut off to prevent

internal damage. Turn the grinder off, allow cool-

ing for several minutes, press the reset button and

turn the mincer on to continue.

• If there is a blockage in the mincer head, switch

the machine to Reverse and then Forward.

Note: During grinding, meat should be discharged from the mincer smoothly. If the discharge is not smooth,

or if it is in the form of a paste, the following causes and remedies should be considered:

Possible Cause Remedy

Coupling too tight

Loose and hand-tighten only until sung.

Don't over-tighten.

Discharge plate is blocked Remove discharge plate and clean, then reinstall.

Blade edges had dulled May be sharpened, recommend replacing.

3. CIRCUIT DIAGRAM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 210819 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 0,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hendi 210819 Manual

Product: