Manual Hendi 210017 (page 8 of 112) (English, German, Dutch, French, Italian, Polish)

741133

Zoom out

Zoom in

1/112

Sharpening the blade

Sharpen the blade when it becomes blunt. The

blade is extremely resistant to wear. If used regu-

larly and properly, it should only need to be sharp-

ened once a year.

• Pull the plug from the wall socket.

• Turn the thickness dial to “0”.

• Clean the blade.

• Unscrew the sharpener’s locking knob.

• Lift the sharpener from the locking device and

turn it 180°.

• Both sides of the blade should have 1 sharpening

stone.

• Lower the sharpener until it slips back into the

locking device.

• Fix the sharpener in place by tightening the lock-

ing knob.

• Switch on the appliance. The blade will start to

turn.

• Use the button to press the tilted sharpening

stone against the blade and keep it there for 2

minutes. The sharpening stone should turn along

with the blade.

• Use the button to press the vertical sharpening

stone brieﬂy against the blade to remove burrs.

The sharpening stone should turn along with the

blade.

• Switch off the appliance and pull the plug from

the wall socket.

• Unscrew the sharpener’s locking knob and clean

the sharpening stones with alcohol.

• Replace the sharpener in its original position on

the appliance and tighten the locking knob to ﬁx it

in place. The blade must not extend between the

sharpening stones.

• Immerse in warm, mild soapy water for several

minutes. Rinse and dry thoroughly.

• Push the plug in the wall socket. Handle with

great care.

• The appliance is ready for use.

Cleaning and maintenance

• Attention: Always unplug the appliance from the

electrical power outlet and let it cool down com-

pletely before cleaning and storage and set the

slice thickness knob to “0” position.

• Clean the appliance after each use.

• Warning: Never submerge the appliance in water

or other liquids!

• Use a damp cloth to clean surfaces (solution of

water and a mild cleaning agent).

• Never use corrosive or abrasive cleaning agents.

Do not use sharp or pointed objects for cleaning.

Do not use benzene or solvents! Clean with a

damp cloth. Use washing-up liquid if needed, but

never abrasive cleaning agents.

• Immerse in warm, mild soapy water for several

minutes. Rinse and dry thoroughly.

• Handle with great care.

• If the food carriage stops sliding smoothly, lay the

machine on its side. Clean the slide bar carefully

and lubricate it with Vaseline

Storage

• Before storage, always make sure the appliance

has already been disconnected from the electri-

cal outlet and cooled down completely.

• Store the appliance in a cool, clean and dry place.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 210017 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 1,84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hendi 210017 Manual

Product: