Manual Hendi 210000 (page 6 of 112) (English, German, Dutch, French, Italian, Polish)

741136

Zoom out

Zoom in

1/112

Preparations before using for the first time

• Check to make sure no parts are missing. If any

parts are missing, contact your supplier.

• Remove all the packing material.

• Check the appliance for completeness and trans-

port damages. In case of incomplete delivery or

damage, contact supplier immediately. DO NOT

use the appliance. (See ==> Warranty).

• Clean the blade. Be careful: the blade is very

sharp. (Use gloves if necessary, not included)

• Keep open a space of at least 10 cm around the

appliance to allow for adequate ventilation.

• Position the appliance in such a way that the plug

is always accessible.

• If the sharpening device is not attached, proceed

as follows:

1. Top view of the appliance 2. Attach the sharpening module

in such a way that the blade

does not move between the

wheels.

3. Secure the sharpening device

to the machine by tightening

the holder. Check to make

sure that the sharpening de-

vice is well secured before us-

ing the machine.

NOTE! The sharpening device is equipped with a safety switch. If the sharpening device is not properly at-

tached, you will not be able to use the appliance.

• Attach the hand guard.

1. Place both screws in

the carriage.

2. Attach the hand

guard.

3. Place the two wash-

ers over the white

bolts.

4. Screw on the two

dome nuts.

NOTE! You are advised not to use the appliance if the hand guard is not attached as instructed! These are

safety features that will prevent possible injury. If you do not attach these features, there will be a risk of

injury.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 210000 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 1,84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hendi 210000 Manual

Product: