Manual Hendi 207208 (page 4 of 52) (English, German, Dutch, French, Italian, Polish)

741289

Zoom out

Zoom in

1/52

• Avoid overloading.

• Turn off the appliance after use by removing the plug from the socket.

• Always remove the plug from the socket when ﬁlling or cleaning the appliance.

• The electrical installation must comply with the applicable national and local regulations.

• This appliance is not intended for use by persons (including children) with reduced phys

ical, sensory or mental capabilities, or lack of experience and knowledge.

Special safety precautions

• Always remove the plug from the socket when ﬁlling or cleaning the deep fryer.

• The electrical installation must satisfy the applicable national and local regulations.

• To avoid the risk of ﬁre, do not allow the oil level to drop below the minimum level. Always

use plenty of oil in the bowl.

• Never use old oil as this increases the risk of ﬁre.

• Never have the oil exceed the Max mark at the oil tank.

• Always clean the appliance and other accessories after each use (-->Cleaning and main

tenance)

• Danger! Never use old oil, old oil has a reduced ﬂash point and is more prone to surge

boiling which increases the risk of ﬁre and dangerous situations.

• Warning! Deep frying moist foods and large quantities at once has an negative inﬂuence

on the boiling point of the oil.

• Warning! Don’t fry to much food at once, maximum load is approximately 2kg.

Preparations before using for the first time

• Check to make sure the appliance is undamaged.

In case of any damage, contact your supplier im-

mediately and do NOT use the appliance.

• Remove all the packing material and protection

ﬁlm (if applicable).

• Clean the appliance with luke-warm water and a

soft cloth.

• Place the appliance on a level and steady surface,

unless mentioned otherwise.

• Make sure there is enough clearance around the

appliance for ventilation purposes.

• Position the appliance in such a way that the plug

is accessible at all times.

Installation

• Screw the knob onto the lid using the M6 screw.

• Press the four rubber feet into the bottom of the

frame.

• Stand the frame on its rubber feet

• Install the deep frying container in the frame.

• Install the detachable control panel on the sup-

port.

NOTE! Ensure that the pin on the support enters the

detachable control panel.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 207208 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 0,64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hendi 207208 Manual

Product: