Manual Hendi 205808 (page 5 of 72) (English, German, Dutch, French, Italian, Polish)

741324

Zoom out

Zoom in

1/72

Installation

• Stand the frame on its rubber feet

• Install the backing oil container in the frame.

• Install the element holder on the support.

NOTE! Ensure that the pin on the support enters

the element holder.

Note: The Fryer tank and element should be placed

in a safe position in your kitchen before usage due

to the hot contents when in use.

Control Panel

Use

• Remove the plug from the socket.

• Fill the container with oil or hydrogenated oil

until the H - mark (MAX level) line.

Note! Solid fats must be preheated before ﬁlling,

this avoids burnt fat and overloading.

• Plug the earthed plug into an earthed socket.

• Set the thermostat to the desired temperature.

The orange lamp will light.

• When the set temperature is reached, the orange

lamp goes out.

• You can now use the deep fryer.

Deep-frying

The deep fryer is designed with a unique cold zone

to allow crumbs and residue to sink to the bottom

this also enables the usable life of the fat/oil to ex-

tend considerably.

Regularly check if there is sufﬁcient oil or fat in the

container. The level should never be below the MIN

line.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hendi 205808 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 1,02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hendi 205808 Manual

Product: