Manual Hema 80005004 (page 7 of 36) (English, German, Dutch, French, Spanish)

750694

Zoom out

Zoom in

1/36

- 6 -

Note: The appliance is designed with an Anti-drip function. You can temporaily remove the jug and pour out

coffee during brewing cycle without coffee dripping from the appliance within 30 seconds.

CAUTION! When pouring coffee from the jug, pour it slowly. Do not incline the jug suddenly in a large tilting

angle, in case the hot coffee flows out from the lid rim and hurt people. Do not put an empty jug back on the

hot warming tray.

AUTOMATIC START FUNCTION

If you do not want the coffee maker to start operation immediately, for example now it is 5:10 pm, you hope

that the coffee maker will automatically start at 8:15 in the evening, first follow steps 1 to 5 of above section,

and then you can set the automatic start function as follows:

1. Press PROG button one time, the word “CLOCK” is showed at the up-right corner of

display.

2. Press the HOUR and MIN button continuously to set the current time (real clock), that is

17:10 (see Fig. 1).

Note: the time cycle is 24 hours.

3. Press PROG button again and the word TIMER shows on up-left corner of display.

4. Set the delayed starting time by pressing HOUR and MIN button repetitively, that is 20:15

(see Fig. 2).

5. Press the ON/OFF button twice, the indicator of AUTO will illuminate. The LCD will display the current clock.

You may see the automatic start time by pressing PROG twice.

Note:

 You may cancel the automatic start function by pressing ON/OFF button once to stop machine, or pressing

ON/OFF button twice to start brewing immediately.

 You can reset the present time and automatic start time by pressing the PROG button once or twice.

Remember when there is a “CLOCK” displayed, you can modify the current time, and when “TIMER” is

displayed, you can modify the automatic start time. If there is no word marking on top, the display shows

the set current time. The coffee maker will adjust to the new time setting if you changed the time midway.

 When the time is due the indicator of AUTO will go out, while the indicator of RUN turn on and the unit

starts brewing. When brewing is finished, the coffee maker will be automatically shut off after 40 minutes

if it is not manually switched off.

MEMORY FUNCTION

If the power supply has been broken off during operation, the appliance will be continued previous operation

automatically from the point when the disconnection occurred provided that the pause does not exceed 10

seconds, even without pressing any button. In the event the pause time exceeds 10 seconds, the display shows

the default setting, and the appliance must be re-started.

Descaling:

 Regularly descale the coffee maker. The intervals of descaling depend on the water hardness and frequency

of operation. In case of average water hardness we suggest descaling every 3 or 4 months. Please use a

commercially available decalcification agent.

 Fill 400 ml of water into the reservoir and add the necessary amount of decalcification agent in accordance

with the dosing instructions.

 Let the decalcification agent sink in the coffee maker for about one hour. Switch on the unit after one hour

and let the water pass through. After that you should brew water twice and rinse all detachable

components, in order to clean off any residue.

20:15

TIMER

Fig.2

Fig.1

CLOCK

17:10

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hema 80005004 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hema 80005004 Manual

Product: