750647
6
Zoom out
Zoom in
Previous page
1/31
Next page
- 5 -
NOTE: Remove the bones of meat, cut meat into small pieces and then place the meat into the bowl. The
maximum quantity of meat cannot exceed 200g in every blending. Pay attention to the MAX level on the bowl.
4. Insert the motor unit onto the chopper lid; turn the motor unit clockwise to have it locked with the lid. Make
sure the arrow is pointing to the locked icon.
5. Plug in the appliance. Use the adjustable speed control to select your desired speed setting, and then press and
hold the on/off button to run the appliance. You can also press and hold the turbo button to inject additional
speed into the blending process.
6. To stop working, just release the on/off button. After use, unplug the appliance.
IMPORTANT! Do not continuously operate the appliance too long. The motor may overheat. Do not allow the
appliance to operate more than 30 seconds at one time. 60 seconds rest time must be maintained between two
consecutive cycles.
CAUTION!
- To reduce the risk of injury, never place cutting blade on base without first putting bowl properly in place.
- Be sure the chopper lid is securely locked in place before operating the appliance.
CLEANING THE APPLIANCE
1. Unplug the appliance and then disassemble it.
2. Wash the stainless steel shaft under the running water. Do not use abrasive cleaner or detergent. Do not
immerse the stainless steel shaft in water as the lubrication on the bearings may be washed away over time.
After cleaning, place the shaft upright so that any water which may have got in can drain out. The stainless steel
shaft is the only part that can be cleaned in a dishwasher.
3. Wash the measuring cup, chopper bowl and blade in warm soapy water. Do not put them in a dishwasher for
cleaning purpose.
4. Wipe the motor unit with a damp cloth. Never immerse it in water for cleaning as electric shock may occur.
5. Dry parts thoroughly after cleaning. Caution: Blades are very sharp. Handle with care.
Quick cleaning:
Between processing tasks, hold the hand-held blender in the cup half filled with water and turn on for a few seconds.
ENVIRONMENT FRIENDLY DISPOSAL
Recycling European Directive 2012/19/EU
This marking indicates that this product should not be disposed with other household wastes. To prevent
possible harm to the environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return your used device, please
use the return and collection systems or contact the retailer where the product was purchased. They can take this
product for environmental safe recycling.
WARRANTY CONDITIONS
HEMA B.V. fully guarantees the product named on the warranty receipt, against all defects caused by material and
manufacturing errors.
For all domestic electrical appliances, the warranty period is 2 years from the date of purchase.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hema 80005003 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hema 80005003 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info