Manual Hema 80.06.0008 (page 17 of 34) (English, German, Dutch, French, Spanish)

701773

Zoom out

Zoom in

1/34

- 16 -

PARTS DESCRIPTION

1. Clamping ring

2. Front guard

3. Blade fastening screw

4. Fan blade

5. Guard fastening screw

6. Rear guard

7. Motor shaft

8. Shaft pin

9. Oscillation button ( )

10. Speed control buttons

11. Upper standing shaft

12. Lower standing shaft

13. Standing base

14. Screws and washers (4 pairs)

ASSEMBLING INSTRUCTIONS

Base and Standing Shaft Assembly

1. Attach the lower standing shaft (12) onto the standing base (13). Use screws and washers (14) to fix the shaft

firmly.

2. Insert the upper standing shaft (11) into the lower standing shaft (12), turning the upper standing shaft (11)

clockwise to tighten the connection of two shafts.

The Whole Assembly

1. Remove the blade fastening screw (3) and guard fastening screw (5) from the motor shaft (7) spindle.

2. Fit the rear guard (6) by positioning with the location pins. Secure the guard onto the motor body with the

guard fastening screw (5).

3. Place the fan blade (4) onto the motor shaft by matching the slot with the shaft pin (8). Fix the blade by

tightening the blade fastening screw (3) in a counter-clockwise direction. Check that the fan blade can rotate

freely by turning it with your hand.

4. Put the front guard (2) against the rear guard (6) and fix with the clamping ring (1). Make sure the clamping

ring is set properly at the rim of the fan guards. Tighten the screw on the clamping ring.

OPERATING INSTRUCTIONS

1. Plug the power cord into a suitable socket.

2. Oscillation: To make the fan head oscillate, press the oscillation button (9). To stop the fan head from

oscillating, press the button “0”, and then restart the fan.

3. The fan is switched on and off by pressing the speed control buttons, i.e. 0 = Off, 1 = Low air flow speed, 2

= Medium air flow speed, 3 = High air flow speed.

4. Tilting Angles: By pushing the fan-guard, you can adjust the fan to the preferred elevation.

CAUTION: Press only one of the speed control buttons at a time. Permanent damage to the switch housing may

result if two or more of the buttons are pressed simultaneously.

CLEANING

1. Before servicing the fan and after each occasion of use, switch off the appliance and unplug the mains cable

from the socket.

2. Never immerse the appliance in water (danger of short-circuit). To clean the appliance, only wipe it down

with a damp cloth and dry it carefully. Always take out the mains plug first.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hema 80.06.0008 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hema 80.06.0008 Manual

Product: