577454
28
Zoom out
Zoom in
Previous page
1/45
Next page
Setting up the antenna
HELLASSAT Point&Play Setup Manual - page 27 Version 1.2 - May 2008
Connecting the iLNB to the IPmodem
To connect the iLNB (Interactive Low Noise Block downconverter) to the IPmodem:
1 Identify the cables marked RX and TX on the coax cables (these marks are printed on the
cables every 50 cm).
2 Put the TX and RX connectors in the appropriate RX and TX jacks on the iLNB.
The outdoor connections need to be waterproof. Make sure to use the outdoor connectors
(with rubber boots) for the iLNB.
3 Put the indoor TX and RX connectors in the appropriate TX and RX jacks on the IPmodem.
Use an 11 mm spanner to screw the connectors on the IPmodem.
Rx Tx
iLNB
TX
iLNB
RX
RESET
DC 15V
LAN
TX
RX
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hellas-Sat Newtec Point and Play at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hellas-Sat Newtec Point and Play in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info