651769
5
Zoom out
Zoom in
Previous page
1/43
Next page
5
Safety notes
Safety precautions regarding high voltage/mains voltage
Very high tensions occur in electrical facilities. Due to voltage ash-over on damaged components (marten
damage etc.) or touching live components the risk of electric shock is likely.
Only user power supply lines with earthing contact.
Only use original cable sets.
Regularly check cables and power supply unit for damages.
Always connect the earth lead from device to vehicle rst.
Carry out installation work, as device connection or component replacement, always when ignition is
turned off.
Do not touch live components when ignition is turned on.
Safety precautions regarding the danger of suffocation
Carbon monoxide is arising with running engine. When breathed in, it will lead to a lack of oxygen in the blood
(danger to life).
Ensure the sufcient ventilation of the workplace.
Always turn on the extraction system and connect it to the vehicle's exhaust when engine is running.
Safety guidelines regarding danger of getting burned
If the engine is running, some components can become very hot (up to several 100°C).
Always use safety equipment (protective gloves etc.).
Do not run connection lines near hot components.
Safety guidelines regarding explosion hazard
Fuel vapours increase the risk of re and explosion when working on the fuel system.
No open re
D
o not smoke
Ventilate the room well
Safety precautions regarding the danger of injury
The running engine causes some parts to rotate (fan blades, belt drives etc.), which can lead to severe injuries.
If the vehicle is not protected against inadvertent rolling, you may be injured.
Do not reach into rotating components when engine is running.
Prevent inadvertent rolling of the vehicle (parking brake).
Additionally position gear selector of automatic gearboxes to P.
Do not run cables near rotating parts.
Safety precautions regarding noise
In order to prevent hearing defects, regard the following actions:
Protect workplaces near the test station against noise.
Use noise protection products.
Safety precautions regarding chemical burn
Escape of the liquid crystals due to a damaged TFT display can cause chemical burn. Immediately rinse
affected parts of the body or clothing with water (consult a doctor).
Immediately consult a doctor if the substance has been breathed or swallowed.
mega macs 42 Section A 3/4
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hella Gutmann mega macs 42 - HBMM42V3400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hella Gutmann mega macs 42 - HBMM42V3400 in the language / languages: English as an attachment in your email.

The manual is 2,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info