629810
549
Zoom out
Zoom in
Previous page
1/654
Next page
HEIDENHAIN CNC PILOT 640 549
8.2 Parameters
Settings for fixed cycles and units:
... / Outside diameter [mm] (115301)
... / Workpiece blank length [mm] (115302)
... / Right edge of workpiece blank [mm] (115303)
... / Inside diameter [mm] (115304)
Parameters: Simulation / ... Meaning
Parameters: Processing / ... Meaning
... / General settings (602000) / ...
... / Type of tool access (602001) Default value for tool access:
0: First from NC program, then from tool table
1: Only from NC program
2: First from NC program, then from magazine
3: First from NC program, then from magazine, then
from tool table
... / Spindle speed limitation [rev/mm] (602004) Default value for spindle speed limitation
... / External safety clearance (SAR) [mm] (602005) External safety clearance on workpiece blank
... / Internal safety clearance (SIR) [mm] (602006) Internal safety clearance on workpiece blank
... / External on machined part (SAT) [mm] (602007) External safety clearance on machined part
... / Internal on machined part (SIT) [mm] (602008) Internal safety clearance on machined part
... / G14 for new units (602009) Default value for "tool change point G14."
... / Coolant for new units (602010) Default value for "coolant CLT":
0: Without (coolant)
1: Circuit 1 on
2: Circuit 2 on
... / G60 for new units (602011) Default value for "protection zone":
0: Active
1: Inactive
... / Safety clearance G47 [mm] (602012) Default value for "safety clearance G47":
... / Safety clearance, G147 plane [mm] (602013) Default value for "safety clearance SCK"
... / Safety clearance, G147 infeed direction [mm] (602014) Default value for "safety clearance SCI"
... / Oversize in X direction [mm] (602015) Default value for "oversize (X) I"
... / Oversize in Z direction [mm] (602016) Default value for "oversize (Z) K"
... / Direction of rotation for new units (602017) Default value for "direction of rotation MD"
549


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Heidenhain CNC PILOT 640 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Heidenhain CNC PILOT 640 in the language / languages: English as an attachment in your email.

The manual is 31,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Heidenhain CNC PILOT 640

Heidenhain CNC PILOT 640 User Manual - German - 656 pages

Heidenhain CNC PILOT 640 User Manual - Dutch - 657 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info