629810

Heidenhain CNC PILOT 640 Manual

488
Zoom out
Zoom in
Previous page
1/654
Next page
488 Graphic simulation
6.2 Simulation window
Single-window view
Single-window view
Only one view is shown in the small simulation window. You switch
the view with the Main view soft key. You can also use this soft key
when only one view is set in the large simulation window.
With cycle programs, you can activate the face or lateral surface view
only when the C axis is used in the program.
Multiple window view
Activating the multiple window view (possible only in the large
simulation window):
Switch the menu bar to "Miscellaneous functions."
Select the "Window" menu item (in the large
simulation window).
Set the desired window combination.
Set the path display in the auxiliary windows.
Path display in supplementary windows: The front face window,
lateral surface window, and YZ view are considered supplementary
windows. The following setting specifies whether the simulation
depicts traverse paths in the windows.
Automatic: The simulation displays traverse paths if the C axis has
been oriented or a G17 or G19 has been executed. G18 or a C axis
out of orientation stops output of the traverse paths.
Always: The simulation shows the traverse path in all simulation
windows.
In the multiple window view, a window is indicated with a green
frame. This window has the "focus," which means that magnification
settings and other functions apply to this window.
Switching the focus
Press the soft key (or the GOTO key) several times
until the focus is on the desired window.
Switching between the single and multiple window display:
Select the menu item (or the decimal point key) to
switch from the multiple-window to single-window
view. The window with the green frame is shown as
a single window view.
Pressing the menu item again (or the decimal key)
switches back to the multiple window view.
Main view soft key
Select the view:
Turning view XZ
Face view XC
Lateral surface view ZC
… 488 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Heidenhain CNC PILOT 640 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Heidenhain CNC PILOT 640 in the language / languages: English as an attachment in your email.

The manual is 31,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Heidenhain CNC PILOT 640

Heidenhain CNC PILOT 640 User Manual - German - 656 pages

Heidenhain CNC PILOT 640 User Manual - Dutch - 657 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info