665947
6
Zoom out
Zoom in
Previous page
1/10
Next page
SLOGBD
HR
Batteriewechsel
Dieser Funkgong verfügt über eine
Frequenz-Speicherfunktion. Wenn Sie
nur die Batterien im Empfänger
wechseln wollen, müssen Sie keine
neue Frequenzeinstellung vornehmen.
Der Funkgong ist direkt wieder
einsatzbereit, nachdem Sie die
Batterien gewechselt und den Sender
einmal betätigt haben.
Wenn Sie im Sender die Batterien
wechseln wollen, müssen Sie nach
dem Einlegen der Batterien die im
Empfänger gespeicherte Frequenz
wie in Rubrik „Frequenzwechsel“
beschrieben löschen und dann den
Sender wie in Rubrik „Erste Inbetrieb-
nahme“ bzw.“ Weitere Sender anlernen“
neu anlernen. Eventuell muss die
Melodie neu eingestellt werden.
Frequenzwechsel
Sollte der Funkgong ertönen, ohne
dass Sie den Sender betätigt haben,
kann dies an einem Gerät in Ihrer
Umgebung liegen, das auf derselben
Frequenz betrieben wird.
Sender und Empfänger können dann
auf eine andere Frequenz eingestellt
werden.
Entfernen Sie für 10 Sekunden die
Batterien aus Sender und Empfänger.
Legen Sie die erste Batterie im
Empfänger wieder ein und betätigen Sie
den CSS-Knopf für 1 Sekunde. Legen
Sie während des betätigen des
CSS-Knopfes die zweite Batterie ein.
Zamjena baterije
Ta brezžični gong vsebuje funkcijo
shranjevanja frekvence. Če želite
zamenjati samo baterije v
sprejemniku, vam ni treba opraviti
nove nastavitve frekvence. Brezžični
gong je takoj spet pripravljen na
uporabo, potem ko ste zamenjali
baterije in enkrat sprožili oddajnik.
Če želite zamenjati baterije v
oddajniku, morate po vstavitvi baterij
izbrisati frekvenco, ki je shranjena v
sprejemniku, kot je opisano v rubriki
„Spreminjanje frekvence, in nato
oddajnik na novo priučiti kot je
opisano v rubriki „Prvi začetek
uporabe“ oz. „Priučitev dodatnega
oddajnika“. Eventualno je treba na
novo nastaviti melodijo.
Mijenjanje frekvencije
Ako se zvono oglasi iako niste
aktivirali odašiljač, razlog je vjerojatno
nekakav uređaj u Vašoj okolini koji
radi na istoj frekvenciji.
Odašiljač i prijamnik mogu se u tom
slučaju namjestiti na neku drugu
frekvenciju.
Za 10 sekund odstranite baterije iz
oddajnika in sprejemnika. Prvo
baterijo ponovno vložite v
sprejemnik in za 1 sekundo
pritisnite CSS gumb. Medtem ko
CSS gumb držite pritisnjen, vstavite
Battery changing
This wireless bell has a frequency
storage function. If you only want to
replace the batteries in the receiver,
you do not have to reset the
frequency setting. The wireless bell is
ready for use again immediately after
you have changed the batteries and
switched the transmitter on.
If you want to change the batteries in
the transmitter, once you have
inserted the batteries you must delete
the frequency stored in the receiver
as described in the “Changing
frequency” section and then retrain
the transmitter as described in the
sections “Switching on for the first
time” or “Training more transmitters”.
It may be necessary to reset the
melody.
Changing frequency
If the wireless bell sounds although
you have not activated the
transmitter, there may be a device in
the vicinity that is being operated on
the same frequency.
In such cases, the transmitter and
receiver can be set to a different
frequency.
Remove the batteries from the
transmitter and the receiver for 10
seconds. Insert the first battery back into
the receiver and press the CSS button
for 1 second. While pressing the CSS
button, insert the second battery. A long
Menjavanje baterije
Ovo bežično zvono sadrži funkciju
pohrane frekvencija. Ako želite
promijeniti baterije samo u
prijamniku, ne smijete poduzimati
nove izmjene frekvencija. Bežično
zvono odmah je spremno za
primjenu čim mu zamijenite baterije
i jednom aktivirate odašiljač.
Ako želite promijeniti baterije u
odašiljaču, nakon umetanja baterija
morate izbrisati frekvenciju
pohranjenu u prijamniku kako je
opisano pod naslovom „Mijenjanje
frekvencije, a zatim ponovo dodati
odašiljač kako je opisano pod
naslovom „Prvo puštanje u rad“ i
„Dodjela dodatnih odašiljača“.
Možda će trebati ponovo namjestiti
melodiju.
Spreminjanje frekvence
Če brezžični gong zadoni, ne da
bi aktivirali oddajnik, je vzrok za to
lahko neka naprava v vaši okolici,
ki obratuje na isti frekvenci.
Oddajnik in sprejemnik se lahko
nato nastavi na neko drugo
frekvenco.
Na 10 sekundi izvadite baterije iz
odašiljača i prijamnika. Ponovo
umetnite prvu bateriju u prijamnik i
jednu sekundu držite pritisnut gumb
CSS. Dok držite pritisnut gumb
CSS, umetnite drugu bateriju.
Min Max
“C”, LR14
Code
Setting
Switch
“C”, LR14
Kodierschalter /
Code Setting Switch
6
5
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Heidemann 70844 - HX Guardian at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Heidemann 70844 - HX Guardian in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Heidemann 70844 - HX Guardian

Heidemann 70844 - HX Guardian User Manual - German, Dutch, French, Italian - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info