665946
8
Zoom out
Zoom in
Previous page
1/12
Next page
SLOGBD
HR
Weitere Sender anlernen
Um einen zweiten, dritten bzw.
vierten Sender anzulernen gehen
Sie wie folgt vor.
Bestücken Sie zunächst den
zweiten Sender mit Batterien
(siehe Rubrik Sender
Batterieinstallation), achten Sie
dabei darauf, dass die Batterien
richtig eingelegt sind bzw., dass
der eventuell vorhandene Batterie
schutzstreifen entfernt ist.
Halten Sie den Druckschalter auf
der Rückseite (siehe Skizze links)
für 1 bis 2 Sekunden gedrückt,
bis Sie einen kurzen Piepton
hören.
Dann betätigen Sie den
Funksender, dieser stellt nun
automatisch eine Frequenz ein
und übermittelt diese an den
Empfänger, welcher daraufhin
ertönt.
Für den dritten und vierten
Sender gehen Sie in gleicher
Weise vor.
Hinweis:
Wenn Sie den Druckschalter
betätigt haben und der kurze
Piepton ertönt, müssen Sie
innerhalb von 5 Sekunden den
Sender auslösen.
Nach 5 Sekunden ertönt für
1 Sekunde ein Dauerton, danach
kann kein Sender mehr angelernt
werden. Wiederholen Sie in
diesem Fall die Prozedur.
Dodjela dodatnih odašiljača
Kako biste dodali drugi, treći ili
četvrti odašiljač, postupite na
sljedeći način:
Najprije umetnite baterije u drugi
odašiljač (vidi stavku Postavljanje
baterije u odašiljač) pritom
obrativši pozornost na pravilan
položaj baterija te provjerite jesu li
uklonjene zaštitne trake za baterije,
ako postoje.
Pritisno stikalo na hrbtni strani
(glejte skico levo) držite pritisnjeno
za 1 do 2 sekundi, da zaslišite
kratek pisk. Nakon toga aktivirajte
radioodašiljač. On zatim
automatski postavlja frekvenciju
i šalje je prijamniku koji se nakon
toga oglašava.
Na isti način postupite za treći i
četvrti odašiljač.
Napomena:
Ako ste aktivirali tlačnu sklopku i
oglasio se kratki zvučni signal,
odašiljač morate aktivirati u roku
od 5 sekundi.
Nakon 5 sekundi se 1 sekundu
oglašava kontinuirani ton, nakon
čega se više ne može dodijeliti
nijedan odašiljač. U tom slučaju
ponovite postupak.
Training more transmitters
In order to train a second, third or
fourth transmitter, do as follows.
First of all, put batteries into the
second transmitter (see
Transmitter Battery Installation
section). Ensure that the batteries
are inserted correctly and that the
battery protective strips, if there
are any, are removed.
Halten Sie den Druckschalter auf
der Rückseite (siehe Skizze links)
für 1 bis 2 Sekunden gedrückt,
bis Sie einen kurzen Piepton
hören.
Now activate the wireless
transmitter; this sets a frequency
automatically and communicates
this to the receiver, which then
beeps.
Do exactly the same for the third
and fourth transmitters.
Note:
If you have pressed the pressure
switch and the short beep
sounds, you must trigger the
transmitter within 5 seconds.
After 5 seconds, a long beep
sounds for 1 second, after which
a transmitter cannot be trained to
the receiver. In such cases,
repeat the procedure.
Priučevanje dodatnih oddajnikov
Za priučitev drugega, tretjega oz.
četrtega oddajnika ravnajte kot
sledi.
Najprej drugi oddajnik opremite z
baterijami (glejte rubriko Instalacija
baterije oddajnika), pri tem bodite
pozorni na to, da so baterije
pravilno vstavljene oz. da je
eventualno prisoten zaščitni trak
baterije odstranjen.
Tlačnu sklopku na poleđini
(pogledajte skicu lijevo) držite
pritisnutu 1 2 sekunde, dok ne
začujete kratki zvučni signal. Nato
aktivirajte brezžični oddajnik, ki
zdaj avtomatsko nastavi frekvenco
in jo posreduje sprejemniku, ki se
na to oglasi.
Za priučitev tretjega in četrtega
oddajnika ravnajte na enak način.
Opozorilo:
Ko ste pritisnili pritisno stikalo in
se zasliši kratek pisk, morate roku
5 sekund sprožiti oddajnik.
Po 5 sekundah se za 1 sekundo
zasliši neprekinjen zvok, po tem
se ne da vpriučiti nobenega
oddajnika. V tem primeru
postopek ponovite.
Mix Max
Code
Setting
Switch
8
7
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Heidemann 70843 - HX Sound at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Heidemann 70843 - HX Sound in the language / languages: English as an attachment in your email.

The manual is 0,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Heidemann 70843 - HX Sound

Heidemann 70843 - HX Sound User Manual - German, Dutch, French, Italian - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info