665937
5
Zoom out
Zoom in
Previous page
1/12
Next page
Der Funksender ergänzt dabei
Ihren bestehenden, verdrahteten
Klingeltaster. Verbinden Sie ein-
fach die Klemmen vom Klingel-
taster mit den Klemmen A und C
am Funksender. (gem. Abbildung
1) Alternativ können Sie den
Funksender auch an den be-
stehenden Türgong anschließen.
Verbinden Sie einfach die
Klemmen vom Gong mit den
Klemmen A und B am Funksender.
(gem. Abbildung 2 + 3)
Wichtig:
Diese Anschlussvarianten sind
nicht möglich in Verbindung mit
beleuchteten Klingeltastern und/
oder batteriebetriebenen Gongs.
Sender Befestigung
Sie können die beiden Löcher
auf der Rückseite des Senders
als Schablone verwenden, um
die Bohrlöcher zu markieren. Die
passenden Dübel und Schrauben
sind im Lieferumfang enthalten.
Alternativ kann der Sender auch
mit einem Klebesockel befestigt
werden, der ebenfalls im Liefer-
umfang enthalten ist. (Nur für
geeignete Oberflächen)
Wichtig:
Durch Montieren des Senders auf
weichmacherfreie PVC Türrahmen
oder Metalloberflächen, wird die
Reichweite eingeschränkt!
Unter einer durchsichtigen
Schutzkappe, auf der Vorderseite
des Senders befindet sich ein
beschriftbares Namensschild.
wireless transmitter complements
your existing wired bell push-
button. Just connect the clamps
of the bell push-button with the
clamps A and C of the wireless
transmitter (see illustration 1)
Alternatively the wireless
transmitter can be connected to
the existing door chime. Just
connect the clamps of the chime
with the clamps A and B of the
wireless transmitter. (see
illustration 2 and 3)
Important:
This variation is not possible in
connection with illuminated bell
push-buttons and/or battery
operated chimes.
Mounting the Transmitter
The pre-cut holes on the back of
transmitter can be used as a
template to mark the drilling holes.
The respective wall-plugs and
screws are included in delivery.
Alternatively the trans-mitter
can be fixed with an adhesive
base, which is also included in
delivery.
(Only for use on suitable
surfaces)
Important:
When mounting the transmitter
on rigid PVC door frames or
metal surfaces the range will be
limited!
Below the see-through protective
cap on front of transmitter is a
name plate, which can be labelled.
Brezžični oddajnik pri tem
dopolnjuje obstoječe, ožičeno
tipkalo za zvonec. Sponki tipkala
za zvonec enostavno zvežite s
sponkama A in C na brezžičnem
oddajniku (skladno s sliko
1).Alternativno lahko brezžični
oddajnik priključite tudi na
obstoječi gong na vratih. Sponki
gonga enostavno zvežite s
sponkama A in B na brezžičnem
oddajniku (skladno s slikama
2 + 3).
Pomembno:
Te možnosti priključitve niso možne
v povezavi z osvetljenimi tipkali za
zvonec in/ali gongi na baterijski
pogon.
Pritrditev oddajnika
Obe luknji na hrbtni strani
oddajnika lahko uporabite kot
šablono za označevanje vrtin.
Ustrezni zatiči in vijaki so
vsebovani v obsegu dobave.
Alternativno se lahko oddajnik
pritrdi s pomočjo lepilnega
podnožja, ki je prav tako
vsebovano v obsegu dobave.
(Samo za ustrezne površine)
Pomembno:
Z montažo oddajnika na vratne
okvirje, izdelane iz PVC-ja brez
mehčal, ali na kovinske površine,
se domet omeji!
Pod prozornim zaščitnim
pokrovom na sprednji strani
oddajnika se nahaja ploščica,
na katero se lahko napiše ime.
SLOGBD
HR
Empfänger Befestigung
Der Empfänger hat auf der
Rückseite ein Befestigungsloch.
Dadurch kann das Gerät an einer
Schraube aufgehangen oder
jederzeit beliebig in einen anderen
Raum mitgenommen werden.
Das Befestigungsmaterial (Dübel
und Schraube) ist im Liefer-
umfang enthalten. Achten Sie
bei der Montage darauf, dass
zwischen Wand und Empfänger
ein Abstand von ca. 3mm
gelassen wird, damit das Gerät
locker eingehangen werden kann.
Melodienauswahl
Der Melodienregler befindet sich
im Sender auf der rechten Seite
über der Batterie und ist mit
einem “S” markiert. Durch
drücken auf den Regler ändert
sich die Melodie gemäß der
unten aufgeführten Liste.
Einstellmöglichkeiten:
1. Westminster
2. Ding-Dong
3. Tubular bells 1
4. Tubular bells 2
5. Popsound 1
6. Piano
7. Popsound 2
8. Old Bell
Durch Betätigen des Senders
wird ein Signal an den Empfänger
gesendet. Um den Rufton zu
wiederholen, drücken Sie den
Klingeltaster erneut. Der Rufton
wird nur 1x erfolgen, auch wenn
Sie den Klingeltaster gedrückt
halten.
Receiver Mounting
The receiver has an pre-cut
mounting hole on its rear side.
Thereby the device can be
mounted on a screw or be taken
to another room at any time.
The fastening materials (screw
and wall-plug) are included in
delivery. When mounting the
device, please maintain the
distance of 3mm between wall
and receiver so the device can
be hung-up easily.
Selection of Melody
The melody control within the
transmitter is situated on the
right above the battery and
is marked “S”. By pressing the
control the melody changes
as listed below.
Adjustment Options
1. Westminster
2. Ding-Dong
3. Tubular bells 1
4. Tubular bells 2
5. Popsound 1
6. Piano
7. Popsound 2
8. Old Bell
By pressing the transmitter a
signal is sent to the receiver. To
repeat the call signal press the
bell push-button again. The call
signal sounds only once, even if
bell push-button is pressed
constantly.
Pritrditev sprejemnika
Sprejemnik ima na hrbtni strani
luknjo za pritrditev. S tem se
lahko napravo obesite na vijak in
kadarkoli poljubno odnesete s
seboj v nek drug prostor.
Material za pritrditev (zatič in
vijak) je vsebovan v obsegu
dobave. Pri montaži pazite na
to, da se med steno in
sprejemnikom pusti razdalja
pribl. 3 mm, da lahko napravo
enostavno obesite.
Izbiranje melodij
Regulator melodij se nahaja v
oddajniku na desni strani nad
baterijo in je označen s črko "S".
S pritiskom na regulator se
melodija spremeni v skladu s
spodaj navedenim seznamom.
Možnosti nastavitve:
1. Westminster
2. Ding-Dong
3. Tubular bells 1
4. Tubular bells 2
5. Popsound 1
6. Piano
7. Popsound 2
8. Old Bell
S pritiskom na oddajnik se
pošlje signal sprejemniku. Da
zvonjenje ponovite, ponovno
pritisnite na gumb za zvonec.
Zvonjenje se zasliši samo 1x,
tudi če gumb za zvonec držite
pritisnjen.
Bežični odašiljač pritom zamjenjuje
vašu postojeću ožičenu tipku za
zvono. Jednostavno spojite
stezaljke tipke za zvono sa
stezaljkama A i C na bežičnom
odašiljaču (prema sl. 1).
Alternativno možete bežični
odašiljač priključiti na postojeće
signalno zvono na vratima.
Jednostavno spojite stezaljke
signalnog zvona sa stezaljkama
A i B na bežičnom odašiljaču
(u skladu sa slikom 2 + 3).
Važno:
Ove varijante priključivanja nisu
moguće u vezi s osvijetljenim
tipkama za zvono i/ili signalnim
zvonima na baterijski pogon.
Pričvršćivanje odašiljača
Obje rupe na stražnjoj strani
odašiljača možete koristiti kao
šablonu za označavanje rupa za
bušenje. Prikladni moždanici i vijci
priloženi su. Alternativno odašiljač
možete također pričvrstiti pomoću
ljepljivog postolja koje je također
priloženo. (Samo za odgovarajuće
površine)
Važno:
Montiranjem odašiljača na PVC
okvire vrata bez omekšivača ili
metalne površine ograničuje se
domet!
Pod prozirnom zaštitnom kapom
na prednjoj strani odašiljača
nalazi se natpisna pločica.
Pričvršćivanje prijemnika
Prijemnik na stražnjoj strani ima
rupu za pričvršćivanje. Pomoću
nje uređaj možete objesiti na
vijak ili ga bilo kada uzeti sa
sobom u drugu prostoriju.
Materijal za pričvršćivanje
(moždanik i vijak) priložen je.
Prilikom montaže pazite na to
da između zida i prijemnika
ostavite udaljenost oko 3 mm
kako biste uređaj mogli labavo
objesiti.
Odabir melodije
Regulator melodija nalazi se
u odašiljaču na desnoj strani
iznad baterije i označen je
slovom „S“. Pritiskom na
regulator melodija se mijenja u
skladu s dolje navedenom
listom.
Mogućnosti namještanja:
1. Westminster
2. Ding-Dong
3. Tubular bells 1
4. Tubular bells 2
5. Popsound 1
6. Piano
7. Popsound 2
8. Old Bell
Aktiviranjem odašiljača
prijemniku se šalje signal. Kako
biste ponovili pozivni ton, iznova
pritisnite tipku zvona. Pozivni ton
ponovit će se samo jedanput,
čak i ako tipku zvona držite
pritisnutu.
3mm
Volume
Code
Setting
Switch
5
4
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Heidemann 70823 - HX Square at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Heidemann 70823 - HX Square in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Heidemann 70823 - HX Square

Heidemann 70823 - HX Square User Manual - German, Dutch, French, Italian - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info