Manual Heco Victa 501 (page 7 of 44) (English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish)

583215

Zoom out

Zoom in

1/44

Dear HECO Customer,

Congratulations onyour fine newloudspeakers and thankyou very muchfor choosing HECO!Youhave

madeanexcellentchoice.Thehigh-qualityspeakersproducedbyHECOarerenownedallovertheworld.

Please study theinstructions and informationbelow carefully beforeusing your newloudspeakers.

GENERAL INFORMATION ABOUT CONNECTING YOUR HECO VICTA LOUD-SPEAKERS

Please always use a good quality loudspeaker connection cable from an audio dealer. To prevent

impairmentofsoundquality,werecommend cableswithcross-sections ofatleast 2.5mm²for lengthsup

to 3 mand at least4 mm²for lengths above3 m.

Always turn off the amplifier or receiver before connecting or disconnecting loudspeaker cables. Place

the loudspeakers in their planned positions and cut the cables to the right length. The cables for both

channels should alwaysbe exactly thesame length.

Strip10–15mmofinsulationfromtheendsofthecables.Twisttheends–thisismuchbetterthantinning

them with solder– insert themin the terminalsand tightenthe terminal screwsfirmly. (Fig.1)

For good sound it is imperative that the cables must be connected in such a way that the speakers are

“in phase”. This means that the black negative terminals on the speakers (-) must be connected to the

negative (-) terminals on the amplifier, the red positive (+) speakerterminals to the positive (+) amplifier

terminals.Tomake thiseasierone wireof mostspeaker cablesismarked witha colouredstrip oraridge

in the insulation.

Beforeswitchingonthesystemdouble-checkallyourconnectionsandmakesurethattheterminalscrews

are tight and that there are no short circuits caused by stray wire filaments – this could cause serious

damage to youramplifier!

THE HECO VICTA LOUDSPEAKERS IN STEREO MODE

Intheidealconfigurationthespeakersandthelisteningpositionshouldformanequilateraltriangle.When

theleftandrightspeakersarethesamedistancefromthelisteningpositiontheirsoundarrivesatthesame

time, resulting ina harmonious, naturalmusic reproduction. (Fig.2)

There should be a clear line of sight between the loudspeakers and the listening position. Any sound-

absorbingorreflectingobstaclesin thepath willdistort thesound. Whenyou install theloudspeakers the

following distancesshould be maintained:

Victa floorstanders:at least20 cmaway from therear walland atleast 30cm from theside walls.This

will prevent excessiveemphasis of thebass range.

Victa bookshelf speakers: shelfloudspeakersshouldalsobeasfree-standingaspossible,thedistance

to the sides and rear to walls and items should be at least 10 cm, the tweeters should be located at ear

height.

Spikes (Victa floorstanders): you should use the supplied spikes when setting the speakers up. This

isolates them from the supporting surface, preventing unpleasant resonance effects. You can choose

between metal and hard rubber spikes for the standing speakers. The spikes are screwed into the

threaded bushes onthe bottom ofthe speaker.

HECO VICTA LOUDSPEAKERS AS A FRONT OR REAR LOUDSPEAKER

Thefrontloudspeakers arepositionedatearheight ontheleftand rightasequidistantfromthetelevision

as possible.The rearloudspeakers areplacedat earheight ora little aboveon the left and rightbesides

or better behindthe listening position.(Fig. 3)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Heco Victa 501 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 0,65 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Heco Victa 501 Manual

Product: