535967
33
Zoom out
Zoom in
Previous page
1/44
Next page
33
CHN
有源式超低音音箱HECO PHALANX MICRO 200A
连接音箱系统时,请您注意先关掉所有的机器,将所有音箱接线的正负极连接正确,即各个
输出的正极与各个输入的正极相接,负极与负极相接。另外还请注意遵守接收器/放大器和音
箱的使用说明书的各项规定。
放置
人的耳朵是无法测定超低音音箱播放频率范围的方位的,所以它的放置位置通常比较随便。
不过我们还是建议将它放在听者的前方与前置音箱的附近为宜。此外您还应该注意它与两侧
的物件或墙壁的距离至少要有30厘米,背面至少要有20厘米,否则会影响低音播放的效果。
超低音音箱的操作部件(图1)
接电源 (1)
由于这是一个有内装放大器的超低音音箱,所以必须用随货一起收到的电源电线将它接入供
电电路中。
供电开关 (2),电源显示-发光二极管]LED (3),电源开关(4)
供电开关开着 供电开关关着
电源开关
开着
超低音音箱持续运作,电源显示发光二极管亮绿灯。
调到这个状态,播放较长段弱声节目会有较好的效果 (
防止无意之中误关超低音音箱)。.
超低音音箱关着
电源显示发光二极
管熄灭
如果较长时间停机
不用,应选择使用
这个调试
状态。
电源开关
处于自动
运作位置
超低音音箱先处于睡眠状态,电源显示发光二极管亮
红灯。
如果超低音音箱收到接收器传来的信号,它就自动开
始运作,电源显示发光二极管亮绿灯。
如果超低音音箱没有收到任何信号,它就在大约15
秒后又自动进入睡眠状态,电源显示发光二极管亮红
灯。
理想的调试状态。
线性输入(5)
接收器/放大器(立体声运作)低电平输出的连接见图2。
带低电平超低音音箱输出的AV-接收器/放大器的连接见图3。
线性输入 (6)
AV-接收器/放大器(立体声运作)的低电平输入的连接见图2,或者增接一个超低音 音箱的方法
亦 见该图。
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Heco PHALANX MICRO 200 A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Heco PHALANX MICRO 200 A in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 1,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info