535975
34
Zoom out
Zoom in
Previous page
1/44
Next page
HECOをご購入されたお客様へ
このたびはHECO製品をお買い求めいただきまして、誠にありがとうございます。当社の
製品がお客様のご要望に応え、ご満足いただけましたら幸いです。お客様がお選びになっ
た当社製品は、その優れた品質において、世界中で認められております。
なお、お買い求めいただいたスピーカーをご使用いただく前に、下記の注意事項を必ず最
後までお読みください。
HECO INC スピーカー – 天井への取付け専用 / 壁面への取付け専用 (図 1)
Heco INC スピーカーはその特殊なクランプ構造により、バッフルボード上にあけられ た穴
への簡単な取付けを可能としています。石膏ボードまたはそれに似た板による天井への取
付けが最も簡単におこなえます。石造建築による壁にあけられた穴へ取付ける場合には、
さらに石膏ボードや木製板で準備する必要があります。取付け寸法に関しては、マニュア
ル最終項の技術データを参照してください。
プロテクターを取り外すと、スピーカーの固定部分にあるクリップに手が届きます。ネジ
をゆるめ、クランプをポジション A にあててください。穴部分への位置決めをおこ なった
後、ネ ジを締めてください。これによりクランプは自動的にポジション B へ回転し、固定
されま す。
HECOスピーカーの接続に関する一般的なご注意
スピーカーを接続するためには、専門店でお買い求めになれる特別なスピーカーコー
ドが必要です。音質が落ちないように、長さが3メートルまでのコードは、断面が最低
1 mm²、それ以上の場合は直径が最低1.5 mm² のコードを用いることをお勧めします。
アンプやレシーバーは、すべての接続作業が終了するまで、スイッチを切っておいてくだ
さい。正確なコードの長さを測ることができるように、スピーカーは予定された位置に配
置しておきます。両方のチャンネルに使用するコードは、どちらも同じ長さにしてくださ
い。
ここで、コードの先端を約10~15mm絶縁し、先端をよじってください。スピーカーコネ
クターはクランプ構造となっています(図2)。クランプのヘッド部分を押し、むきだしとな
っているメッキ先端を側面の穴へ差し込んでください。クランプのヘッド部分から手を放
すとケーブルが固定され、確実な端子接続がおこなわれます。
コードを接続する時は、必ず位相に応じた接続をするよう、気をつけてください。つま
り、スピーカーの黒い端子(-)は、アンプの(-)端子と、それからスピーカーの赤
い端子(+)は、アンプの(+)端子と接続していなければなりません。市販のスピーカ
ー・コードですと、位相に応じた接続が間違いなく行えるよう、コードの内部が波型の起
伏になっているか、色違いのストライプで印がついています。
コードがしっかり繋がれているか、また突き出た導線などでショートしていないかどう
Sか、よく確かめてください。この二つの事項は、アンプに重大な損傷を与える原因とな
ることがありますので、ご注意ください。
34
J
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Heco INC 62 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Heco INC 62 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 1,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info