Manual Heco CELAN GT CENTER 42 (page 6 of 44) (English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish)

535943

Zoom out

Zoom in

1/44

Dear HECO Customer,

Congratulations onyourfine newloudspeakers andthank youverymuch forchoosing HECO!Youhave

madeanexcellentchoice.Thehigh-qualityspeakersproducedbyHECOarerenownedallovertheworld.

Please study theinstructions and informationbelow carefully before usingyour new loudspeakers.

GENERALINFORMATIONABOUT CONNECTINGYOUR HECOCelan GT LOUDSPEAKERS

Please always use a good quality loudspeaker connection cable from an audio dealer. To prevent

impairment of sound quality, we recommend cables with cross-sections of at least 2.5 mm² for lengths

up to 3m and atleast 4 mm²for lengths above 3m.

Always turn off the amplifier or receiver before connecting or disconnecting loudspeaker cables. Place

the loudspeakers in their planned positions and cut the cables to the right length. The cables for both

channels should alwaysbe exactly thesame length.

Strip10–15mmofinsulationfromtheendsofthecables.Twisttheends–thisismuchbetterthantinning

themwithsolder–insertthemintheterminalsandtightentheterminalscrewsfirmly(fig.1).Loudspeaker

cables with CE-compliantbanana or single-pinplugs (4 mm) orforked fittings canalso be used.

For good sound it is imperative that the cables must be connected in such a way that the speakers are

“in phase”. This means that the black negative terminals on the speakers (-) must be connected to the

negative (-) terminals on the amplifier, the redpositive (+) speaker terminals to the positive (+) amplifier

terminals.Tomake thiseasieronewire ofmostspeakercables ismarkedwitha colouredstripora ridge

in the insulation.

Beforeswitchingonthesystemdouble-checkallyourconnectionsandmakesurethattheterminalscrews

are tight and that there are no short circuits caused by stray wire filaments – this could cause serious

damage to youramplifier!

HECO CELAN GT- BI-WIRINGAND BI-AMPING

Connector panel on theHeco Celan GT loudspeakers:

The connector panels on the Celan GT speakers are equipped with 5 terminal screws, enabling bi-

wiring/bi-ampinginadditiontoconventionalconnectiontoanamplifier.Theupperterminalsareconnected

to the treble andmid-treble side of thecrossover and the lower terminalsto the bass side.An additional

connector terminal enablesa 2dB trebleboost option.

Bi-wiringmeans usingseparatecablestocarrythe highandlowaudio frequencies.Bi-ampingtakesthis

idea one step further and uses separate power amplifiers as well as separate cables for high and low

frequencies. Bi-amping inparticular producesan additional improvement insound reproduction quality.

Forconventionalconnections,metalbridgesareinstalledasstandardtomakethe+2dBtrebleadjustment

active.Thebridgecanbeswitchedtothelinearsettingbyunscrewingthecorrespondingterminals.(Fig.2)

Theterminalshavetoberemovedforbi-wiringandbi-ampingmode.Fig.3andfig.4showtheconnection

to the amplifier(s).

The right treble setting depends on the room, the positioning of the speakers and, of course, personal

taste. The +2dB setting is recommended for rooms with heavy upholstered furniture and curtains, for

example, which havea mufflingeffect.

THE HECO CELANGT 302, 502,702AND 902 INSTEREO MODE

Intheidealconfigurationthespeakersandthelisteningpositionshouldformanequilateraltriangle.When

theleftandrightspeakersarethesamedistancefromthelisteningpositiontheirsoundarrivesatthesame

time, resulting ina harmonious, naturalmusic reproduction.

There should be a clear line of sight between the loudspeakers and the listening position. Any sound-

absorbingorreflecting obstacles inthepathwill distortthesound.Whenyou install theloudspeakersthe

following distancesshould be maintained:

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Heco CELAN GT CENTER 42 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 1,18 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Heco CELAN GT CENTER 42 Manual

Product: