535966
22
Zoom out
Zoom in
Previous page
1/56
Next page
Collegamento alla rete (1), Interruttore di selezione tensione di rete (2)
Essendo un subwoofer con amplificatore integrato, deve essere collegato alla rete mediante il cavo
fornito in dotazione. Il selettore della tensione di rete Å è impostato in fabbrica a 230 V per un impiego
nell’area europea.
Molto importante: se il subwoofer viene collegato ad una rete 230 V in posizione 115 V, viene inevita-
bilmente distrutto l‘amplificatore integrato!
Interruttore d’accensione (3), Visualizzazione dello stato operativo (4)
Interruttore di accensione ON Interruttore di accensione OFF
L’accensione / spegnimento automatico è attivata.
Quando il subwoofer riceve un segnale dal ricevitore, questi si
accende automaticamente e il LED è verde.
Quando il subwoofer non riceve più alcun segnale, dopo alcuni
minuti passa automaticamente in modalità standby, il LED è
rosso.
Consumo energetico in modalità standby: 0,5 W.
Subwoofer è disattivato, il LED è
spento.
Quando l‘apparecchio non viene
utilizzato per un periodo pro-
lungato, si consiglia di scegliere
questa impostazione.
Ingresso AV (5)
Collegare l’uscita dei livelli bassi del subwoofer del proprio ricevitore (Sub-Pre-Out) con l’ingresso AV
del subwoofer (vedi fig. 3). Per questa operazione è necessario un cavo Mono-Cinch (non compreso
nella fornitura).
Ingressi livelli alti (6)
Per il collegamento alle uscite dei livelli alti del regolatore (altoparlante) del ricevitore/amplificatore. Si
veda Fig. 2.
Regolatore del livello (7)
Con questo regolatore si imposta a piacere il volume dei bassi:
1. Portare in posizione centrale (lineare) il regolatore dei bassi nell’amplificatore.
2. Molto importante: girare il regolatore del livello fino alla posizione d’arresto sinistra (volume minimo).
3. Accendere la musica ed aumentare a piacere il volume con il regolatore dell’amplificatore.
4. Con il regolatore del livello portare il livello dei bassi al volume desiderato.
Regolatori di separazione (8)
Vanno regolati secondo la frequenza più elevata alla quale opera il subwoofer. In combinazione con i
Vostri satelliti HECO AMBIENT, il regolatore dovrebbe essere impostato sui 120 - 150 Hz.
Per il funzionamento su ricevitori AV/amplificatori il regolatore della frequenza di taglio deve essere
impostato sul valore massimo (200 Hz). La frequenza di trasferimento tra subwoofer ed altoparlante
viene quindi regolata dal setup del ricevitore/amplificatore. Si prega a tal proposito di osservare le istru-
zioni d’uso del proprio ricevitore/amplificatore.
Regolatore di fase (9)
Nel funzionamento normale si consiglia di posizionare l‘interruttore di fase su 0°. In pochi casi potrebbe
essere vantaggioso impostare la fase su 180° (ad es. In caso di distanza elevata tra subwoofer ed i
satelliti frontali o in caso di caratteristiche acustiche sfavorevoli dell‘ambiente) Generalmente vale: La
posizione corretta è quella nella quale il campo del suono fondamentale inferiore risuona in modo più
pieno.
22
I
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Heco AMBIENT 5.1 A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Heco AMBIENT 5.1 A in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 1,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info