721486
10
Zoom out
Zoom in
Previous page
1/26
Next page
10
Installation Requirements
The ideal mounting position for the HEATSTRIP
.
Design is on the ceiling, directly above the area to be heated. If this is not
possible, HEATSTRIP
.
can be mounted on a wall and angled downwards. In this situation, ensure the mounting height is
in the range of 2.1m to 2.7m and the table is within 2.5m of the wall.
For mounting heights more than 3m, we recommend the use of the optional accessories to reduce the height of the heater
to 2.3m - 2.7 m. This will increase the effectiveness of your HEATSTRIP
.
Refer to the Mounting Accessory section for
more information.
Electrical connections/GPO’s should not be located at the back of the heater. They should be located outside the physical
footprint of the units to minimize heat build-up behind the units.
If the heater is to be mounted on an incline (eg. Vaulted ceiling), ensure the electrical connection is located at the lowest
point of the heater.
Incorrect Installation Correct Installation
The heating surface must never be directed toward the ceiling
CEILING
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Heatstrip Design THD3200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Heatstrip Design THD3200 in the language / languages: English as an attachment in your email.

The manual is 3,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Heatstrip Design THD3200

Heatstrip Design THD3200 User Manual - German - 26 pages

Heatstrip Design THD3200 User Manual - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info