721487
17
Zoom out
Zoom in
Previous page
1/26
Next page
17
CLEARANCE DIMENSIONS
HEATER
BRACKET x2
FLUSH MOUNT ENCLOSURE
TIMBER BATTEN
PLASTER CEILING
SCREWS, AT EACH END, THERE ARE 6 HOLES
WITH A DIAMETER OF 8mm EACH
ON
OFF
INSTALLATION INSTRUCTIONS
"D"
"D"
END TO END MOUNTING BRACKET
TWIN MOUNT BRACKET
HEATER
BRACKET x2
FLUSH MOUNT ENCLOSURE
SIDE OF HOLE
SCREWS, AT EACH END, THERE ARE 6 HOLES
WITH A DIAMETER OF 8mm EACH
ON
OFF
INSTALLATION INSTRUCTIONS
"D"
"D"
Installation Instructions
Ensure all minimum clearance requirements are met and the materials used
are compliant to your local building codes.
Before installing the Flush Mount Enclosure, ensure the site to be fixed is
fully prepared with the hole cut the correct size and the mounting points se-
curely in place.
STEP 1: Attach the brackets to the
rear of the heater. The dimensions
for the spacing of the brackets is
listed in the table.
STEP 2: Screw the Flush Mount
Enclosure into the side of the hole.
NOTE: screws are not included.
STEP 3: If there is no roof access,
connect the heater to the power
source, ensure the power is OFF.
STEP 4: Lift the heater into the
Flush Mount Enclosure ensuring
the brackets are to the side of the
mounts
STEP 5: Push the heater to the left
ensuring the brackets engage in the
mounts. It will then drop in. Shake
the heater to ensure that it is se-
curely mounted.
MODEL
“D”
DISTANCE FROM END
TO BRACKET (mm)
THH1500AEU 150
THH2400AEU 370
THH3200AEU 425
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Heatstrip Design THD2400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Heatstrip Design THD2400 in the language / languages: English as an attachment in your email.

The manual is 3,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Heatstrip Design THD2400

Heatstrip Design THD2400 User Manual - German - 26 pages

Heatstrip Design THD2400 User Manual - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info