721488
14
Zoom out
Zoom in
Previous page
1/26
Next page
14
VIEW FROM TOP
VIEW FROM UNDERNEATH
Flush Mount Enclosure
The Flush Mount Enclosure is an ideal way to neatly install the HEATSTRIP Design into a ceiling. They are available
for all HEATSTRIP Design models, and are supplied as a one-piece unit for mounting of heaters. Flush mounting can
be used with plaster or wood lined or concrete ceiling materials.
An ideal mounting height is 2.5m-2.7m, with a maximum ceiling height of 3.0m in an outdoor enclosed environment.
Maximum mounting heights should be strictly followed, otherwise the performance of the units may be reduced.
The facia of the enclosure is manufactured from 316 Stainless Steel and the rear casing is black zinc coated steel.
Please refer to the Installation Manual for more detailed installation information.
Safety
Do not allow any cables, furnishings, flammable materials or other items come in contact with any surface of the Flush
Mount Enclosure.
The Flush Mount Enclosure needs to be installed as per the installation instructions paying special attention to the
minimum clearances. The heater needs to be mounted on a rigid bracket or fixing.
Maintenance Flush Mount Enclosure
The Flush Mount Enclosure is made from durable materials, however regular care and maintenance of your product
will help prolong its life.
It is recommended that you wipe down your Flush Mount Enclosure and with a soft cloth gently wipe the surfaces of
the Flush Mount Enclosure with a mild detergent to remove the built up contaminants from the environment. Then with
a clean cloth ensure all detergent is removed.
All chemicals in the atmosphere including cigarette smoke, pollution etc. will tarnish the surface of the Flush Mount
Enclosure. In this case, additional cleaning and maintenance may be required. The cleaning process at least every
three months will reduce the amount of build up and keep it looking as best it can. If the Flush Mount Enclosure is in a
corrosive environment eg. salt spray, we recommend that you clean the Flush Mount Enclosure every week.
Before cleanings or inspection activity, the heater must be switched off and cooled down completely.
Do not use any abrasive materials or products to clean the Flush Mount Enclosure, this includes solvents, citrus
based cleaners or other harsh cleaning products.
When handling the Flush Mount Enclosure, ensure that your hands are clean or that you use clean gloves as grease
or dirt can mark the surface of the heater.
Do not use high pressure water to clean Flush Mount Enclosure. It is not recommended to hose down the Flush
Mount Enclosure and heater as water may get into the roof cavity.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Heatstrip Design THD1500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Heatstrip Design THD1500 in the language / languages: English as an attachment in your email.

The manual is 3,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Heatstrip Design THD1500

Heatstrip Design THD1500 User Manual - German - 26 pages

Heatstrip Design THD1500 User Manual - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info