Manual HDigit Slicer (page 27 of 162) (English, German, French, Italian)

595051

Zoom out

Zoom in

1/162

English

Slicer

5.1 General Operation

1. Press MODE repeatedly until < FM Radio > is displayed.

For initial use, it will start at the beginning of the FM frequency range (87.50MHz).

Otherwise, the last FM station listened to will be selected.

Note: or enter < Main menu >, and then turn SELECT to < FM >, press SELECT to conrm.

5.2 Scan Setting

P By default, FM scans stop at any available station. This may result in a poor signal-to-noise ratio

(hiss) from weak stations.

P To change the scan settings so that they stop only at stations with good signal strength, press

MENU→< Scan setting > →Strong stations only? →Yes, press SELECT to conrm.

5.3 How to Scan

1. To manually adjust frequency, when the frequency shows up, press and hold MENU until it

says ‘Turn to tune’, and then turn SELECT to adjust it by 0.05MHz per step, or while the frequency is

displayed, press up/down on the remote control to adjust manually.

2. For auto-searching, when the frequency is displayed, simply press SELECT, or SCAN.

Chapter 5 - FM Mode

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of HDigit Slicer in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 3,29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

HDigit Slicer Manual

Product: