Manual Hayward SuperPump VSTD (page 28 of 192) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

801903

Zoom out

Zoom in

1/192

USE ONLY HAYWARD® GENUINE REPLACEMENT PARTS

27 Pump

MAINTENANCE

1. Completely disconnect the pump from the mains power supply before opening the cover and cleaning the strainer. Clean

the strainer basket regularly. Do not bang on the basket to clean it. Check the seal on the cover of the strainer and

replace it if necessary.

2. The motor shaft is mounted on self-lubricating bearings which do not require any subsequent lubrication.

3. Keep the motor clean and dry and ensure the ventilation openings are not blocked.

4. The mechanical seal occasionally starts to leak and must then be changed.

5. Apart from cleaning the pool, all repairs, servicing and maintenance must be carried out by a Hayward®-approved agent

or a qualified person.

Wear parts of the pump mentioned below should be maintained according to their estimated life:

Wear parts estimated life

Mechanical seal 1 year

Motor bearings kit 1 year

Set of gasket (strainer, housing, bulkheads, drain) 2 years

Capacitor 2 years

WINTERING

1. Empty the pump by removing all the drain plugs and store them in the strainer basket.

2. Disconnect the pump, remove the pipe connectors and store the entire unit in a dry, well-ventilated place or at least take

the following precaution: disconnect the pump, remove the 4 bolts attaching the pump housing to the motor bracket and

store the unit in a dry, well-ventilated place. Then cover the pump housing and strainer to protect them.

N.B.: Before recommissioning the pump, clean all the internal parts to remove dust, lime scale etc.

TROUBLESHOOTING

A) The motor does not start

1. Check the electrical connections, switches or relays, and the circuit breaker or fuses.

2. Ensure that the motor turns freely by hand.

3. Check that rotation speeds V1, V2 and V3 are not programmed at 0rpm. If they are, restore the factory settings (see

section 4.4).

4. If the screen displays any of the error messages below, please contact your vendor:

Err01 Constant low line voltage Err10 Internal problem with electrical supply

Err02 Constant high line voltage Err20 Starting problems

Err04 Power module overheating Err64 Internal short-circuiting problem

Err05 Motor overheating Err97 Multiple problems

Err07 Overload Err98 Communication problem

dSTop Refer to page 21

B) The motor stops, check

1. The cables, connections, relays etc.

2. Voltage drop on motor (frequently caused by cables that are too small).

3. That there is no seizing or overheating (by reading the absorbed current).

N.B.: The motor on your pump is fitted with a thermal protection which, in the case of overload, will automatically cut the

circuit and avoid the motor being damaged. This triggering is caused by abnormal usage conditions which need to be

checked and corrected. The motor will restart without any intervention as soon as normal operating conditions are restored.

C) "OLOAD" appears on the display (overload or over-heating problem)

1. Check that the motor shaft turns freely

2. Check that no debris is preventing the turbine from rotating freely

3. Check that the motor is correctly ventilated

4. After correcting the problem, press the On/Off button

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hayward SuperPump VSTD in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 27.15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hayward SuperPump VSTD Manual

Product: