801909
11
Zoom out
Zoom in
Previous page
1/64
Next page
USE ONLY GENUINE REPLACEMENT PARTS
Page 5 of 5 Salt & Swim 2.0 Rev. A
9. WATER FLOW ALARM
8. ‘LOW’ ALERT
7. CHLORINATION BOOST MENU
1. Press and hold the ‘+’ button for 3 seconds to enter the menu dedicated to chlorination
boost.
2. The LEDs light up green.
3. Adjust the boost production using the buttons ‘+’ and ‘-’.
From this moment on, production will be maintained for 24h as long as water is owing
through the unit.
After this time period, the unit will return to its previous production situation.
If the LEDs light up yellow, the unit has not reached the desired production.
This may be due to various factors:
- Lack of salt.
- Scaled-up cell.
- Exhausted cell.
- Low water temperature.
Blue LEDs show the congured production and yellow LEDs show the actual production.
If the 3 LEDs in the centre are ashing orange, the unit is not producing.
This means that there is no water ow inside the installation. Check
- Flow switches,
- Conguration (see section 11),
- For correct ow.
10. REDUCING PRODUCTION USING THE COVER
1. Connect the cover to the box (see section 5).
2. Press and hold the ‘-’ button for 3 seconds to enter the menu dedicated to reduction
of production.
3. The LEDs light up purple.
4. Adjust to the desired production using the buttons ‘+’ and ‘-’.
5. The reduction is applied to the production already congured.
6. Save the conguration by pressing the ‘+’ button until you return to the previous
menu.
When the cover contact is closed, the LEDs will automatically light up purple and
prodution will be limited to the programmed setpoint.
11. SELECTING THE FLOW SWITCH
1. Connect the mechanical ow switch to the box (see section 5).
2. Press the ‘-’ and ‘+’ buttons simultaneously and hold for 3 seconds to enter the menu.
3. Select the position using the buttons ‘+’ and ‘-’.
Position 1: Gas sensor only.
Position 3: Flow switch only.
Position 5: Gas sensor + ow switch.
4. Save the conguration by pressing the ‘+’ button until you return to the previous menu.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hayward Salt and Swim 2.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hayward Salt and Swim 2.0 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian as an attachment in your email.

The manual is 48.56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info