Manual Hayward K-Flo Pump (page 7 of 64) (English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish)

801924

Zoom out

Zoom in

1/64

USE ONLY HAYWARD GENUINE REPLACEMENT PARTS

7 Pump

TROUBLESHOOTING

A) The motor does not start

1. Check the electrical connections, switches or relays, and the circuit breaker or fuses.

2. Ensure that the motor turns freely by hand.

B) The motor stops, check

1. The cables, connections, relays etc.

2. Voltage drop on motor (frequently caused by cables that are too small).

3. That there is no seizing or overheating (by reading the absorbed current).

C) The motor growls but does not start, check that a phase is not cut, the capacitor is not damaged.

D) The pump does not prime

1. Ensure the strainer housing is lled with water, that the cover seal is clean and correctly positioned and

that no air can enter. If necessary, tighten the cover lock screws.

2. Ensure that all the suction and discharge valves are open and not blocked and that the suction outlets in

the pool are fully submerged.

3. Check that the pump draws by freeing the suction as close as possible to the pump:

a) If the pump does not draw despite being su󰀩ciently full of priming water

1. Tighten the bolts and pipe accessories on the suction side.

2. Check the voltage to ensure that the pump is rotating at the correct speed.

3. Open the pump and check that nothing is blocking it inside,

4. Replace the mechanical shutter.

b) If the pump is drawing normally, check the suction pipe and strainer which may be blocked or be

allowing air to enter.

E) Low ow - Generally, Check for :

1. Clogged or restricted strainer or suction line; undersized pool piping.

2. Plugged or restricted discharge line of lter (high discharge gauge reading).

3. Air leak in suction (bubbles issuing from return ttings).

4. Pump operating under speed (low voltage).

5. Plugged or restricted impeller.

F) Noisy pump, check

1. That no air is entering the suction side and causing dull crackling in the pump.

2. That there is no cavitation caused by insu󰀩cient diameter or a restriction in the suction tube. An over-si

zed discharge pipe can also cause cavitation. Use pipes of the correct size or purge the pipes if

necessary.

3. That no vibration is occurring due to incorrect tting.

4. That there are no foreign bodies in the pump housing.

5. That the motor bearings have not seized due to excessive clearance, rust or prolonged overheating.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hayward K-Flo Pump in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 18.92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hayward K-Flo Pump Manual

Product: