Manual Hayward K-Flo Pump (page 4 of 64) (English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish)

801924

Zoom out

Zoom in

1/64

USE ONLY HAYWARD GENUINE REPLACEMENT PARTS

4 Pump

WARNING: Electrical Hazard. Failure to follow

instructions can result in serious injury or death.

FOR USE WITH SWIMMING POOLS

c WARNING – Disconnect the pump from the main power supply completely before servicing the pump or lter.

c WARNING – All electrical connections must be done by a qualied electrician according to local electrical standard or,

failing that, to the International Standard IEC 60364-7-702.

c WARNING – Be certain the machine is only connected into a protected outlet that is protected from short-circuits. The

pump is to be supplied by an isolating transformer or supplied through a residual current device (RCD) having a rated

residual operating current not exceeding 30 mA.

c WARNING – Children should be supervised to ensure that they do not play with the appliance. Keep ngers and fo-

reign objects away from openings and moving parts.

c WARNING – Motor must be suitably grounded. Connect ground wire to green grounding screw and for cord connected

units use properly grounded outlet.

c WARNING – Use a motor bonding lug to connect motor with other bonded parts using the appropriate size conductor

as required by electrical codes.

c WARNING – When making these electrical connections, refer to the diagram given under the lid of the motor terminal

box. Be sure to check the electric connections are tight and sealed before powering up. Replace all covers before ope-

ration.

c WARNING – Make sure that the power supply voltage required by the motor corresponds to that of the distribution

network and that the power supply cables matches the power and current of the pump.

c WARNING – Read and follow all instructions in this owner’s manual and on the equipment. Failure to follow instruc-

tions can cause serious injury or death.

This document should be given to the owner of the swimming pool and must be

kept by the owner in a safe place.

c WARNING – The appliance can be used by children aged from 8 years and above and persons with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, if they have been given supervision or instruction

concerning use of the appliance in a safe way and understand the hazards involved.

c WARNING – Cleaning and user maintenance shall not be made by children without supervision.

c WARNING – The pump is intended for continuous operation at Maximum Water temperature 35°C.

c WARNING – Use Only Genuine HAYWARD Replacement Parts.

c WARNING – If the supply cord is damaged it must be replaced by the manufacturer, service agent, or similarly quali-

ed persons in order to avoid a hazard.

c WARNING – For disconnection from main power supply an external switch having a contact separation in all poles

that provide a full disconnection under overvoltage category III conditions must be incorporated in the xed wiring in

accordance with the wiring rules.

c WARNING – Do not operate the swimming pool pump if the power cord or the housing of the motor connection box

is damaged. This can cause an electric shock. A damaged power cord or motor connection box must be replaced by a

service agent or a similarly qualied person immediately in order to avoid a hazard.

c WARNING – This pool motor is NOT equipped with a Safety Vacuum Release System (SVRS). SVRS helps prevent

drowning due to body entrapment on underwater drains. In some pool conguration, if a person’s body covers the

drain, the person can be trapped by suction. Depending on your pool conguration, a SVRS may be required to meet

local requirements.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hayward K-Flo Pump in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 18.92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hayward K-Flo Pump Manual

Product: