801902

Hayward EZ-Chem Manual

18
Zoom out
Zoom in
Previous page
1/69
Next page
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
Page 4 of 13 EZ-CHEM Rev. B
GENERAL
EZ-Chem is a device for regulating the pH of your pool.
With the addition of an ORP kit (optional), it can also regulate both the pH and the liquid chlorine injection to provide you with a complete
treatment.
EZ-Chem can treat pools up to 90 m3.
INSTALLATION
Disconnect the pool filter pump before starting the installation. The installation must be carried out in accordance with the standards
currently in force in the country. The control box must be mounted a minimum horizontal distance of 3.5 m (or more, if required by local
regulations) from the pool and within 1 m of a protected outlet.
Preparing the water in the pool
To prepare the pool water, its chemical composition must be balanced. Certain adjustments to the chemical balance of the pool can take
several hours. It is therefore necessary to start the procedure well before switching the unit on.
Chemical water balance
The following table summarizes the concentrations recommended by Hayward. It is important to maintain these concentrations to prevent
surface corrosion or deterioration and to derive full benefit from your pool. Control your water regularly. Your authorized Hayward dealer
or pool suppliers will provide you with the chemicals you need, together with instructions on how to use them, to adjust the chemical
balance of the water in your pool.
CHEMISTRY RECOMMENDED CONCENTRATIONS
Free chlorine 1.0 to 3.0 ppm
pH 7.2 to 7.6
Cyanuric acid
(Stabiliser)
20 to 30 ppm (preferably 25 ppm)
Only add stabiliser if necessary
Total alkalinity 80 to 120 ppm
Water hardness 200 to 300 ppm
Saturation index -0.2 to 0.2 (preferably 0)
Saturation index
The saturation index (Si) gives us information about the calcium content and alkalinity of the water; it is a water balance indicator. Your
water is correctly balanced if the Si is 0 ± 0.2. If the Si is below -0.2, the water is corrosive and the coating on the pool walls may be
damaged. If the Si is above +0.2, stains may appear. Use the following table to determine the saturation index.
Si = pH + Ti + Ci + Ai - 12.1
°C °F Ti Hardness
(calcium) Ci Total
alkalinity Ai
12
16
19
24
29
34
39
53
60
66
76
84
94
100
0.3
0.4
0.5
0.6
0.7
0.8
0.9
75
100
125
150
200
250
300
400
600
800
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.4
2.5
75
100
125
150
200
250
300
400
600
800
1.9
2.0
2.1
2.2
2.3
2.4
2.5
2.6
2.8
2.9
Use: Measure the pH of the pool water, the temperature, the water
hardness and the total alkalinity. Use the table above to determine Ti,
Ci and Ai in the above formula. If the Si is equal to 0.2 or more, stains
may appear. If the Si is equal to -0.2 or less, corrosion or deterioration
may occur.
{
- 0.2 0.20
OK
CORROSION STAIN
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hayward EZ-Chem at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hayward EZ-Chem in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 59.76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info