801896

Hayward EnergyLine Pro - R32 Manual

42
Zoom out
Zoom in
Previous page
1/328
Next page
2
This product contains refrigerant gas R32
This device contains R32.
Never use a refrigerant other than R32. Any other gaseous body mixed
with R32 could cause abnormally high pressure and lead to a failure or
pipes bursting and injuring people.
During repairs or maintenance operations, use copper tubes that
comply with Standard NF EN 12375-1 and with European Pressure
Equipment Directive 97/23/EC.
As the heat pump is pressurized, never pierce the pipes or attempt any
brazing. There is a risk of explosion.
Never expose the device to flames, sparks or other sources of ignition.
It could explode and cause serious or even fatal injuries.
To detect refrigerant leaks: do not use a halide lamp or any other
detector that uses an open flame. Do not use potential sources of
ignition under any circumstances.
This product contains fluorinated greenhouse gases regulated by the Kyoto
protocol. Do not release these gases into the atmosphere.
GWP(1) value: 675, based in the 4th report of the IPCC.
The quantity of refrigerant, based on the F-Gas regulation no. 517/2014, is
stated on the unit's rating plate.
Any intervention on the cooling circuit must be carried out by an accredited
professional as mentioned hereinabove.
Periodic inspections for leaks of refrigerant may be required by European or local
legislation. Please contact your local distributor for more information.
• Warning, refrigerants can be odourless.
• Do not pierce or heat the pipes, risk of explosion and serious burns.
• Do not use a method for accelerating the defrosting or cleaning process other
than those recommended by the manufacturer.
• The device must be stored in a room that does not contain any source of
ignition operating on a permanent basis (for example, open flames, gas
device or electric radiator that is operating).
(1) Global warming potential
1.
GENERAL INSTRUCTIONS - SAFETY
(continued)
… 42 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hayward EnergyLine Pro - R32 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hayward EnergyLine Pro - R32 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish, Norwegian as an attachment in your email.

The manual is 15.59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info