Manual Hayward AquaVac 650 (page 21 of 98) (English, German, Dutch, French, Italian, Portuguese, Spanish)

801917

Zoom out

Zoom in

1/98

Some water is kept in the canister to enable the self-cleaning

and ushing function for a true touch-free debris disposal.

If desired, most of the water can be removed from the canister

by simply tilting it toward the suction inlet check-valve.

Doing so may result in having to rinse the canister after

ushing the debris.

1. Turn the power off.

2. Lift the handle of the debris canister.

3. Remove the debris canister from the cleaner.

4. Twist the canister right and left to agitate the water and

loosen the debris, which may be packed within the canister.

5. When above the desired debris disposal area, squeeze the

red knob so the bottom lid opens and debris is ushed out

of the canister.

6. If needed, rinse the canister.

7. Close the bottom lid of the canister.

8. Replace the canister on the cleaner by aligning the suction

inlet on the canister with the suction inlet on the cleaner.

9. Press the handle down until a “click” is heard, and it is

locked in position.

You can now put the cleaner back in the pool or place

it in storage.

CLEANING THE DEBRIS CANISTER

CAUTION - RISK OF EQUIPMENT DAMAGE

Operating the cleaner with a full lter or debris canister will

result in reduced performance, limited wall-climbing capability

and limited debris pick-up. Empty and clean the lter or

canister, when needed, to maintain optimal performance.

Heavier debris such as sand, pebbles and rocks may require

more frequent cleaning, since they have a greater effect on the

weight and buoyancy of the cleaner.

CLICK

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hayward AquaVac 650 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 12.48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hayward AquaVac 650 Manual

Product: