801888
20
Zoom out
Zoom in
Previous page
1/98
Next page
During its cleaning cycle the cleaner may not climb the wall
or any vertical surfaces every time. It will adjust its cleaning
sequence to offer optimal pool coverage.
For a quicker cleaning of the main area of the pool, the
Bottom Only mode may be selected.
It is normal for the cleaner to operate in both forward and
reverse directions.
To avoid risk of damage or injury, the cleaner will not
operate when out of the water. It is equipped with sensors
that will allow it to recover from beach entry style pools or
shallow areas.
CLEANING CYCLE
START
*STOPS*
30 s.
The cleaner is equipped with an anti-tangling, electronic
cable which balances the left and right turning sequence
during a cleaning cycle. If running multiple cycles without
removing the cleaner, the cable may show some twisting.
To straighten the cleaner cable, let it lie in the sun, removing
any bends or kinks from operation or storage.
When the cleaning cycle is completed, the cleaner will go
into stand-by mode for 30 minutes (Start/Stop button light
is blinking green).
If no action is performed for 30 minutes, the cleaner will go
into sleep mode (Start/Stop button light turns solid blue).
When the cleaning cycle is completed and the cleaner is either in
sleep mode (Start/Stop button light is solid blue) or in stand-by
mode (Start/Stop button light is blinking green), The AquaVac 6
Series can be easily removed from the pool by using the
“Tug & Catch” function.
1. Sharply and quickly tug the cable toward you three times
(Start/Stop button light will begin blinking white).
2. Wait for the cleaner to drive to the wall and climb
to the waterline.
3. Remove the cleaner by pulling it out of the water using the
handle on the cable.
4. Allow the cleaner to drain on the pool deck before removing
the canister for cleaning.
5. When removed from the pool, tug detection may occur and
the pump will start for few seconds. This is not unusual.
REMOVING THE CLEANER FROM THE POOL
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hayward AquaVac 6 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hayward AquaVac 6 Series in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 12.48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hayward AquaVac 6 Series

Hayward AquaVac 6 Series User Manual - English - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info