Le niveau redoX vous informe du potentiel d’oxydation ou du niveau, il sert à déterminer le niveau de stérilisation de l’eau. Les paramètres ou réglages sont : les niveaux
minimum / maximum acceptés par le redoX avant la connexion / déconnexion de la cellule de titane. Ajuster le niveau idéal redoX (réglage) est la dernière étape dans la
séquence de démarrage des système. Pour trouver le niveau optimal redoX de votre piscine, suivez les étapes suivantes :
1. Connecter le système de filtration de la piscine (le sel dans la piscine doit être dissout de façon adéquate).
2. Ajouter du chlore à la piscine jusqu’à atteindre un niveau de 1 à 1,5 ppm. Celui-ci est atteint avec (environ 1 à 1,5 g/m3 d’eau). Le niveau de pH devrait osciller entre 7,2 et 7,5.
3. Après 30 min. Vérifier le niveau de chlore libre de la piscine (manuel kit de test DPD1) Si le niveau de chlore libre est compris entre 0,8 à 1,0 ppm. Regarder l’écran du
redoX et mémoriser ce niveau comme point de réglage pour connecter / déconnecter la cellule d’électrolyse/hydrolyse.
4. Le lendemain, vérifier les niveaux de chlore libre (manuel kit de test DPD1) et redoX, Augmenter / diminuer le réglage si necessaire.
5. N’oubliez pas de vérifier le setpoint de redoX tous les 2-3 mois et / ou lorsque les paramètres de l’eau changent (pH / température / conductivité).
4.1 MESURES / Calibrage pH
4.2 MESURES / Calibrage redoX
3.1 HYDROLYSE 3.2 UV
4. MESURES / Setpoints
4.14.24.34.1Mesures : Réglage des points de consigne et sondes de mesure.
4.2Setpoints pour chacune des mesures.
4.3Détermination de setpoints : Configurer les niveaux idéaux pour
chacun des paramètres. Les valeurs standards seraient :
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Hayward AquaRite UV LS at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Hayward AquaRite UV LS in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.
The manual is 6.81 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
