801906

Hayward AquaRite Plus Manual

31
Zoom out
Zoom in
Previous page
1/166
Next page
USE ONLY GENUINE REPLACEMENT PARTS
Page 7 of 23 AquaRite + Rev. E
Connecting the water supply points
Install the measuring chamber as close as possible to the pool pipes to avoid head losses.
Drill a 10 mm hole. Place the flat gasket on the pipe fitting and insert the assembly into the hole, as illustrated below. Tighten the
fitting with the clamp provided. Once the fitting has been secured to the pool pipe, insert the hose firmly into the pipe and tighten
the retaining nut by hand.
Clamping
collar
Retai-
ning nut
Pipe tting
Flat
gasket
Installing the pH and ORP probes on the measuring chamber
The pH and ORP probes are "wet" packed and protected by plastic caps. The probes must always remain wet. If the probes are
allowed to dry, they will be permanently unusable (not covered by the warranty) and the pH-ORP test kit will be ineffective.
Remove the pH and ORP probes from their plastic protective caps and set the caps aside for later use (wintering). To ensure that
the probes remain wet at all times, fill the measuring chamber with pool water before installing the probes. Apply a length of Teflon
tape to the probe threads. Tighten the probes by hand only. Check that they are watertight at startup. If the probes leak, do not
tighten them further, but remove the Teflon tape and apply a new one.
After installation, check that the probes are constantly in contact with the water in the pool. When the filtration pump is not running
(even for long periods), the water remaining in the chamber may be sufficient to protect the probes.
Installation on
AquaRite +
Installation on
AquaRite +
with ORP
option
Plugs Plug
ORP probepH probe pH probe
Valves Valves
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hayward AquaRite Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hayward AquaRite Plus in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 66.99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info