801911
31
Zoom out
Zoom in
Previous page
1/177
Next page
7 / 20 AquaRite Pro Rev. C
Information Menu
The Information Menu displays valuable system and pool information. The AquaRite Pro will
default to displaying a portion of the Information Menu when no buttons have been pushed
for 2 minutes. The unit will automatically scroll through several status displays. To access all
of the Information Menu items, push the INFO button on the front panel. Advance through
the various menu items using the "<" or ">" buttons. A list of the Information Menu items is
shown below.
The AquaRite Pro desired output % is shown here. If Super Chlorinate is
active, the display will show the time remaining until the AquaRite Pro will
return to the desired output %. This menu is disabled if an AQL-CHEM is
used and ORP Auto Sensing is enabled (see AQL-CHEM manual).
This display will be shown only if chemical sensing is enabled. This display
shows both pH and ORP levels/status when chemistry sensing is enabled

Sensing Kit). The AquaRite Pro will refer to these levels to determine how
much chlorine to generate (ORP) and how much acid to dispense (pH). Refer

as the recommended ranges.
+/- 23.45V is the voltage applied to the chlorinator cell
+/-6.75A is the current (amps) through the cell
29°C is the water temperature at the cell
3.2 g/L is the “instant” salt level at this time


setting must be set greater than 0%, the water temperature at the cell must
be between 12ºC and 60ºC, and the salt level must be within the operating
range. If any of these conditions are not met, the chlorinator diagnostic
display will tell you the reason. It’s possible to have more than one reason,

display will appear.
If the current (amps) display is 0.00A, then the chlorinator is operating
normally but is in the off part of its normal operating cycle. Simply press
either the “+” or “-“ key to start a new cycle.
If ORP Auto Sensing is not used
Chlorinator
50 %
No Function
Move to previous/next menu item
Super Chlorinate
22:15 remaining
No Function
Move to previous/next menu item
If AQL-CHEM is used
No Function
Move to previous/next menu item
pH 7.5 (On)
ORP 700 mV (On)

Move to previous/next menu item
+23.45 +6.75A
29°C 3.2 g/L
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hayward Aqua Rite Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hayward Aqua Rite Pro in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 4.78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info