801911
25
Zoom out
Zoom in
Previous page
1/177
Next page
1 / 20 AquaRite Pro Rev. C
OPERATION
The AquaRite Pro is an automatic chlorine generation system for pool or spa sanitization. The
operation requires a low concentration of salt (sodium chloride) in the pool water. These levels
are low enough that it normally will not be tasted. The AquaRite Pro automatically sanitizes
your pool by converting the salt into free chlorine which kills bacteria and algae in the pool.
Chlorine will revert back to sodium chloride after killing bacteria. These reactions will continu-
ously recycle virtually eliminating the need to add sanitizing chemicals to your pool. The only
time you may need to add more salt to the pool is when water is replenished due to backwashing,
draining, or splashing (not evaporation).

pools up to 150 m3, or the needs of most commercial pools up to 95 m3. Check local codes for
other restrictions. The actual amount of chlorination required to properly sanitize a pool varies
due to bather load, rainfall, temperature, and the pool's cleanliness.
AquaRite Pro chlorine generators operating with software version 1.00 or later are designed to
use one of 3 different chlorinator cells that are available from your authorized Hayward dealer.
Choose the appropriate cell based on the size of your pool. The models are shown below:
T-CELL-15-E - for pools up to 150 m3
T-CELL-9-E - for pools up to 95 m3
T-CELL-3-E - for pools up to 60 m3
Note that the installation and mounting requirements are the same for all models.
The AquaRite Pro can be used with the optional Goldline AQL-CHEM to provide a fully in-
tegrated chemistry solution for your pool. With the AQL-CHEM installed, the AquaRite Pro
senses the pool's ORP and pH levels and automatically generates the correct amount of chlorine
to keep your pool properly sanitized. The AquaRite Pro can also control pH by introducing acid
into the pool when needed. A dedicated on/off control output is available for pH dispensing
devices using 230 V
. The AquaRite Pro and AQL-CHEM products offer the user a complete
automated system controlling both sanitization and pH balance.
NOTE: It is not recommended to use the AquaRite Pro to generate bromine.


installation specialist should be consulted regarding the appropriate type, installation, sealant
(if any) and maintenance of stone used around a saline pool with electronic chlorine generator
in your particular location and circumstances.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hayward Aqua Rite Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hayward Aqua Rite Pro in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 4.78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info